期刊文献+

螺杆泵及配套工艺在稠油开采中的应用 被引量:2

Application of screw pump and its matching technology to heavy oil production.
下载PDF
导出
摘要 孤岛油田局部稠油井曾采用挤稠油降粘剂、泵下掺水等工艺,效果不明显。1993年对这部分油井采取地层化学处理、地面掺热水降粘与螺杆泵配套使用的采油工艺等措施,使原来大多数生产不正常的油井恢复正常生产,平均单井日产油量由原来的0.77t增加到6.23t,检泵周期由原来62天延长到355天,年累计增产原油2.4705×104t。 Because oil in some wells of Gudong oilfield is very heavy, treatment by injecting thinner and mixing water under pump is not effective. In 1993, such technologies as formation chemical treating, surface crude mixing with hot water and screw pump were used in these wells, most of them came into regular, single well oil production increased from 0.77 t/d to 6.23 t/d and pump detection period prolonged from 65 days to 355 days, accumulative oil production increased by 24705 ton per year.
出处 《油气采收率技术》 CSCD 1998年第3期71-74,共4页
关键词 稠油开采 配套工艺 螺杆泵 采油工艺 heavy oil recovery, matching technology, screw pump
  • 相关文献

参考文献3

  • 1周广厚.运用螺杆泵举重油[J].国外油田工程,1994,10(42):18-20.
  • 2魏纪德,师国臣,于波.螺杆泵抽油杆柱负载扭矩计算[J].石油机械,1995,23(9):38-43. 被引量:33
  • 3万邦烈 李继志.石油矿场水力机械[M].北京:石油工业出版社,1990.1-63.

二级参考文献2

共引文献64

同被引文献23

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部