摘要
对X70管线钢现场实际焊接工艺下的焊接接头,采用显微镜、电化学方法及失重法等方法和手段对母材、焊缝、热影响区进行了显微组织分析和在海水中的极化曲线、腐蚀速率的测试,研究焊接接头在模拟海水环境中的腐蚀性能。研究表明,X70管线钢焊接接头各区域组织不均匀,实验室模拟海水环境下的电化学行为、腐蚀速率存在明显差异;在海水腐蚀过程中腐蚀电位和腐蚀速率会发生变化,热影响区(HAZ)与母材及焊缝形成电偶腐蚀,接头腐蚀以点蚀为主。
The welding joint of X70 pipeline steel under certain practical welding process is studied.The microstructure of welding base metal,welding seam and HAZ of X70 pipeline steel are analyzed with microscope and elec-chemistry,the polarization curves and corrosion rate of different welding joint zones are tested in order to study the corrosion resistance property.The results show that the microstructure of different zones of welding joint is uneven,and there are obvious difference in corrosion rate and electrochemical behavior,corrosion potential and rate of different zones of welding joint change during the process of corrosion,and couple corrosion is formed between HAZ and welding base metal,at the same time,welding joint mainly exists spot corrosion.
出处
《西南石油大学学报（自然科学版）》
CAS
CSCD
北大核心
2009年第5期171-174,共4页
Journal of Southwest Petroleum University(Science & Technology Edition)
基金
西南石油大学校级科技基金项目资助(2007XJZ041)
关键词
X70管线钢
焊接接头
显微组织
海水腐蚀
电偶腐蚀
X70 pipeline steel
welding joint
microstructure
seawater corrosion
spot corrosion
