摘要
The object of this work is to investigate the influence of process parameters on drilling characteristics of an Al 1050 sheet with a thickness of 0.2 mm using a pulsed Nd:YAG laser through numerical analyses and experiments. By comparing the numerical analyses with the experiments, a proper numerical model was obtained. From the results of the numerical analyses and the experiments, the effects of process parameters on entrance diameters of drilled holes, shapes of the holes, taper angles of the holes and temperature distributions in the vicinity of the holes were examined quantitatively. In addition, the optimal drilling condition was estimated to improve the quality of the drilled holes.
The object of this work is to investigate the influence of process parameters on drilling characteristics of an Al 1050 sheet with a thickness of 0.2 mm using a pulsed Nd:YAG laser through numerical analyses and experiments. By comparing the numerical analyses with the experiments, a proper numerical model was obtained. From the results of the numerical analyses and the experiments, the effects of process parameters on entrance diameters of drilled holes, shapes of the holes, taper angles of the holes and temperature distributions in the vicinity of the holes were examined quantitatively. In addition, the optimal drilling condition was estimated to improve the quality of the drilled holes.
出处
《中国有色金属学会会刊:英文版》
CSCD
2009年第B09期157-163,共7页
Transactions of Nonferrous Metals Society of China
基金
supported by a grant-in-aid of Regional Innovation Center(RIC),New Technology Development and Research Center of Laser Application in Chosun University,Korea.
关键词
YAG激光器
工艺参数
Nd
脉冲
井用
厚度
色基
数值分析
Al 1050 sheet
pulsed Nd:YAG laser
process parameters
drilled hole formation
temperature distribution
optimal drilling condition