期刊文献+

钛酸钾晶须对无石棉有机摩擦材料性能的影响 被引量:3

Effect of potassium titanate whiskers on compressibility and friction properties of NAO friction material
下载PDF
导出
摘要 钛酸钾晶须是无石棉有机(NAO)摩擦材料中一种新兴的增强材料。该文作者以一种成熟的NAO配方为基础,采用粉末冶金法制备钛酸钾晶须增强的NAO摩擦材料,研究晶须含量(质量分数,%)对材料可压缩性和摩擦磨损性能的影响。结果表明:随着钛酸钾晶须含量增加,一方面引起材料孔隙度增大,导致材料的冷压缩变形量增大,另一方面通过降低材料的热膨胀率来降低材料热压缩变形率;钛酸钾晶须对摩擦材料的低温摩擦性能影响较小,但具有稳定高温摩擦因数和提升抗热衰退性的作用,适量钛酸钾晶须的加入可以降低材料的高温磨损率。钛酸钾晶须的最佳含量为8%~12%。 Potassium titanate whiskers(PTW) is a new kind of reinforcing fiber in non-asbestos organic(NAO) friction material due to its excellent performance. Based on one kind of mature NAO formulation, the NAO frication material reinforced with PTW is prepared by using powder metallurgy technology, and the effect of PTW content on compressibility and frictional behaviors of the experimental material has been investigated. The results show that the cold compressibility increases and hot compressibility decreases with the increasing of PTW content, PTW has little effect on the low temperature friction property of friction material. Adding reasonable content ( not above 12%) of PTW is helpful to stabilize friction coefficient and decrease wear rate at high temperatures. The best content of PTW is about 8% to 12%.
出处 《粉末冶金材料科学与工程》 EI 2009年第5期326-330,共5页 Materials Science and Engineering of Powder Metallurgy
基金 科技部国际合作计划项目
关键词 钛酸钾晶须 NAO摩擦材料 可压缩性 摩擦性能 PTW NAO friction material compressibility friction properties
  • 相关文献

参考文献14

  • 1张清海.有机摩擦材料学[M].北京:中国摩擦密封材料协会,2008:15-16.
  • 2BIJWE J J, KUMAR M, GURUNATH P V, et al. Optimization of brass contents for best combination of tribo-performance and thermal conductivity of non-asbestos organic (NAO) friction composites [J]. Wear, 2008, 265(5/6): 699-712.
  • 3HAN Ling, HUANG Li, ZHANG Jin-sheng, et al. Optimization of ceramic friction materials [J]. Composite Science and Technology, 2006, 66(15): 2895-2906.
  • 4FENG Xin, DIAO Xiao-song, SHI Yi-jun, et al. A study on the friction and wear behavior of polytetrafluoroethylene filled with potassium titanate whiskers [J]. Wear, 2006, 261(11/12): 1208 1212.
  • 5吴训锟 王浩 王昌松 等.摩擦材料中钛酸钾应用的关键问题.摩擦密封材料,2006,(3):13-16.
  • 6CHO M H, KIM S J, KIM D, et al. Effects of ingredients on tribological characteristics of a brake lining: an experimental case study [J]. Wear, 2005, 258(11/12): 1682-1687.
  • 7KIM S J, CHOA M H , BASCHB R H, et al. Tribological properties of polymer composites containing barite (BaSO4) or potassium titanate (K20-6(TiO2) [J]. Tribology Letters, 2004, 17(3): 655-661.
  • 8KIM Y C, CHO M H, KIM S J, et al. The effect of phenolic resin, potassium titanate, and CNSL on the tribological properties of brake friction materials [J]. Wear, 2008, 264(3/4): 204-210.
  • 9吴训锟,王昌松,冯新.晶须状填料对酚醛树脂摩擦材料性能的影响[J].润滑与密封,2007,32(11):122-126. 被引量:18
  • 10黄培云.粉末冶金原理[M].北京:冶金工业出版社,2008:388-389.

二级参考文献32

  • 1何新波,张长瑞,周新贵,张新明,周安郴.烧结温度对C_f/SiC复合材料界面的影响[J].国防科技大学学报,2000,22(4):34-37. 被引量:5
  • 2晏建武,张晨曙,袁永瑞,李卫超,闵嗣林.氮化硅/碳化硅(n)纳米复相陶瓷的烧结工艺探索[J].南昌航空大学学报(自然科学版),2003,19(2):5-8. 被引量:3
  • 3李康.定速摩擦试验机试验方法和数据处理方法研究[J].非金属矿,1996,19(2):51-55. 被引量:12
  • 4陆小华 暴宁钟 冯新 等.六钛酸钾晶须及纤维的制造方法[P].中国专利:99114005.2.19990-01-07.
  • 5应文绍 胡钟灵.蛭石的性能及其应用.地质地球化学,1988,16(6):70-72.
  • 6李宏.芳纶摩擦材料[J].摩阻材料工业信息,1991,(3).
  • 7王曙中.芳纶摩擦材料研究的新进展[A]..′97摩擦材料与减摩技术学术会议论文集[C].北京:中国摩擦材料协会,1997..
  • 8曹献坤.[D].武汉:武汉理工大学,2000:44-46.
  • 9吴培熙.摩擦材料用树脂性能评述[A]..全国摩擦材料协会会议论文集[C].杭州:中国摩擦材料协会,1999..
  • 10Halvlr K.Inert Electrodes in Aluminum Electrolysis Cells[A].Minerals,Metals and Materials Society.Light Metals Proceedings of Sessions,TMS Annual Meeting[C].1999,369-376.

共引文献53

同被引文献18

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部