摘要
A series of experiments of investigating the recrystallization of single crystal DD3 superalloy were carried out. The threshold temperature for recrystallization and the effect of annealing temperature on recrystallization were studied. The results show that the threshold temperature for recrystallization of the shot-peened DD3 samples is between 1 000 ℃ and 1 050 ℃ under the condition of annealing for 2 h, and the recrystallization depth increases with the rise of the annealing temperature. Below 1 150 ℃, the recrystallization depth increases slowly with the temperature climbing, while above 1 150 ℃, the recrystallization depth increases quickly with the rise of the temperature. The solution of the γ＇ phase is a critical factor of the recrystallization behavior of DD3 superalloy. In addition, the kinetics and microstructural evolution of recrystallization at 1 200 ℃ were also studied. It is found that the recrystallization progresses rapidly at 1 200 ℃ through the growth of fully developed recrystallized grains, and the recrystallization process on the shot-peened surface is similar to that of wrought materials, including nucleation of recrystallization, growth of new grains into the matrix, and growth of new grains by swallowing up each other.
A series of experiments of investigating the recrystallization of single crystal DD3 superalloy were carried out. The threshold temperature for recrystallization and the effect of annealing temperature on recrystallization were studied. The results show that the threshold temperature for recrystallization of the shot-peened DD3 samples is between 1 000 ℃ and 1 050 ℃ under the condition of annealing for 2 h, and the recrystallization depth increases with the rise of the annealing temperature. Below 1 150 ℃, the recrystallization depth increases slowly with the temperature climbing, while above 1 150 ℃, the recrystallization depth increases quickly with the rise of the temperature. The solution of the γ＇ phase is a critical factor of the recrystallization behavior of DD3 superalloy. In addition, the kinetics and microstructural evolution of recrystallization at 1 200 ℃ were also studied. It is found that the recrystallization progresses rapidly at 1 200 ℃ through the growth of fully developed recrystallized grains, and the recrystallization process on the shot-peened surface is similar to that of wrought materials, including nucleation of recrystallization, growth of new grains into the matrix, and growth of new grains by swallowing up each other.
基金
Item Sponsored by Open Foundation of Nondestructive Test Key Laboratory of Chinese Ministry of Education(ZD200729011)
