Effect of near isothermal forging on the microstructure of Ti_3Al/TC11 welding interface
被引量：4
Effect of near isothermal forging on the microstructure of Ti_3Al/TC11 welding interface
基金
supported by the Natural Na-tional Science Foundation of China (No. 50775187)
参考文献2
-
1姚泽坤,张梅琳,梁新民,郭鸿镇.热力耦合作用对TAC-1B和TC11合金焊接界面硬度和显微组织的影响[J].焊接学报,2004,25(2):125-128. 被引量：20
-
2姚泽坤,梁新民,郭鸿镇,陈绍楷,张会.热力因素对合金元素在Ti-24Al-15Nb-1.5Mo/TC4焊接界面上扩散规律的影响[J].稀有金属材料与工程,2005,34(6):907-911. 被引量：20
二级参考文献15
-
1曹京霞,孙福生,曹春晓,高扬.Ti_3Al基合金的应变疲劳性能[J].稀有金属材料与工程,1996,25(1):17-20. 被引量：3
-
2张澜庭,吴建生,邱国华.Ti_3Al基合金高温氧化行为的原位X射线衍射研究[J].稀有金属材料与工程,1997,26(2):23-26. 被引量：6
-
3James C Williams. Materials requirements for aircraft engines [ A ].Aerospace thermal structures and materials for a new Era[ C ].Edited by Earl A. Thornton, AIAA, 1995.360-372.
-
4阿列克山大JD 贺开运 译.宇航材料的锻造和性能[M].北京:国防工业出版社,1985.25-57.
-
5波诺马廖夫БA 姚学敏 朱会生 译.航空发动机的现状与未来[M].北京:国防工业出版社,1987.211-220.
-
6Williams J C. Edited by Earl A. Thornton. Aerospace Thermal Structures and Materials for a New Era[M]. AIAA: 1995:360-372.
-
7AlexanderJDetal by贺开运etal．Translation.宇航材料铸造与性能[M].Beijing: National Defence Industry Press,1985.25-57.
-
8by姚学敏etal．Translation.航空发动机的现状与未来[M].Beijing:National Defence Industry Press,1987.211-220.
-
9张永刚etal.金属间化合物结构[M].Beijing: National Defence Induslry Press,2001.799-812.
-
10Greenfield M A, Pierce C M, Hall J A. Titanium80'. Science and Technology[C]. New York: RTI, 198D,3:1731.
共引文献30
-
1邹贵生,白海林,谢二虎,宁立芹,梁德彬.Ti_3Al基合金及其与异种材料的连接研究现状[J].宇航材料工艺,2007,37(1):1-5. 被引量：5
-
2刘莹莹,姚泽坤,郭鸿镇.航空发动机用双性能盘的制造技术研究进展[J].材料导报,2007,21(12):95-98. 被引量：23
-
3高峻,姚泽坤,梁新民,刘莹莹,郭鸿镇.热模锻造对Ti-24Al-15Nb-1.5Mo/TC4双合金界面连接强度与组织的影响[J].航空材料学报,2008,28(2):14-18. 被引量：9
-
4钱锦文,侯金保,李京龙,熊江涛,张赋升.Ti2AlNb／GH4169真空扩散连接初步研究[J].热加工工艺,2008,37(13):90-92. 被引量：8
-
5钱锦文,李京龙,侯金保,熊江涛,张赋升,韩增产.Nb＋Ni中间层对Ti2AlNb与GH4169扩散连接接头组织与性能影响[J].航空材料学报,2009,29(1):57-62. 被引量：9
-
6高峻,姚泽坤,刘莹莹.电子束焊接热输入对Ti-24Al-15Nb-1.5Mo/TC11双合金焊接接头组织和显微硬度的影响[J].焊接学报,2009,30(7):33-36. 被引量：4
-
7刘莹莹,姚泽坤,杨航航,秦春,郭鸿镇.热处理对Ti_3Al/TC11双合金盘拉伸性能与组织的影响[J].航空材料学报,2009,29(4):21-26. 被引量：10
-
8Ying-ying Liu Ze-kun Yao Hong-zhen Guo Hang-hang Yang.Microstructure and property of the Ti-24Al-15Nb-1.5Mo/TC11 joint welded by electron beam welding[J].International Journal of Minerals,Metallurgy and Materials,2009,16(5):568-575. 被引量：6
-
9高峻,姚泽坤,刘莹莹,郭鸿镇,杨航航.改造Ti-24Al-15Nb-1.5Mo/TC11双合金焊缝组织与增强连接界面性能的工艺[J].稀有金属材料与工程,2009,38(11):2043-2047. 被引量：3
-
10杨航航,姚泽坤,高峻,郭鸿镇,刘莹莹,王敏.梯度热处理对Ti_3Al/TC11双合金焊接界面组织和显微硬度的影响(英文)[J].稀有金属材料与工程,2010,39(1):22-26. 被引量：14
同被引文献32
-
1Wang Guo,Hui Songxiao,Ye Wenjun,Mi Xujun,Wang Yongling,Zhang Wenjing.Microstructure and tensile properties of low cost titanium alloys at different cooling rate[J].Rare Metals,2012,31(6):531-536. 被引量：8
-
2WUHuiqiang FENGJicai HEJingshan ZHOULi.Microstructural characterization of electron beam welded joints of TiAl-based intermetallic compound[J].Rare Metals,2005,24(1):82-86. 被引量：4
-
3姚泽坤,梁新民,郭鸿镇,陈绍楷,张会.热力因素对合金元素在Ti-24Al-15Nb-1.5Mo/TC4焊接界面上扩散规律的影响[J].稀有金属材料与工程,2005,34(6):907-911. 被引量：20
-
4YANG Shanglei XUE Xiaohuai LOU Songnian CHEN Yan LI Shimin.Electron beam welding of Re and BT5-1 titanium alloy[J].Rare Metals,2005,24(3):293-297. 被引量：5
-
5Sun Z, Karppi R. Application of electron beam welding for the joining of dissimilar metals: an overview [J]. J. of Mater. Process. Teclmol., 1996, 59 (3): 257-267.
-
6Abroad M, Akhter J I, Akhtar M. Microstrueture and hardness studies of the electron beam welded zone of HasteUoy C-276[J]. J. Alloys Comp., 2005, 390(1-2):88-93.
-
7Yao Z K, Guo H Z, Zhang M L. The influence of hot working processing on mechanical proparties of Ti3Al-Ti dual alloy welded by electronic beam welding in vacuum[A]. Ti-2003 Science and Technology, Edited by G. Lutjering and J. Albrecht. The 10th Word Conference on Titanium [C]. Hamburg, 2003. Warrendale, TMS, 2004, Ⅱ:715-720.
-
8Liu Yingying, Yao Zekun, Guo Hongzhen, et al. Microstructure and property of Ti-24Al-15Nb-1.5Mo/TC11 welding interface by electron beam welding [J]. International Journal of Minerals Metallurgy and Materials, 2009,16(5):568-575.
-
9Xu D S, Song Y, Li D, et al. Site occupancy of alloying elements in Ti3Al Compounds [J]. Mater. Sci. Eng.,1997, (234-236)A:230-233.
-
10Hao Y L, Xu G S, Cui Y Y, et al. The site occupancies of alloying elements inTiAl and TidAl alloys[J]. Acta Mater., 1999, 47:1129-1139.
引证文献4
-
1刘莹莹,程晓峰,张勇召.焊接电流对Ti_3Al/TC11焊接界面合金元素扩散及显微硬度的影响[J].热加工工艺,2012,41(17):167-169. 被引量：1
-
2范希营,郭永环,张亮,李顺才,许以军.La/CeO_2稀土对熔敷金属拉伸断口形貌与力学性能的影响[J].稀有金属,2013,37(6):883-888. 被引量：5
-
3康彦.焊接电流对Ti_3Al/TC11合金焊缝区组织及合金元素扩散的影响[J].金属热处理,2014,39(3):75-77. 被引量：3
-
4Ke-Zhao Zhang,Zheng-Long Lei,Yan-Bin Chen,Ke Yang,Ye-Feng Bao.Microstructural evolution and numerical simulation of laser-welded Ti_(2)AlNb joints under different heat inputs[J].Rare Metals,2021,40(8):2143-2153. 被引量：2
二级引证文献11
-
1关意鹏.汽车顶盖天窗侧整形模设计[J].锻压技术,2015,40(1):90-93. 被引量：7
-
2王希靖,柴廷玺,刘骁,肖军.纯镍N6填丝等离子焊接工艺及接头组织性能的研究[J].稀有金属,2015,39(2):103-110. 被引量：6
-
3杨廷志,吴长军,王建华,刘亚,涂浩,苏旭平.冷却条件和Ce含量对Galfan合金凝固组织及其耐蚀性的影响[J].稀有金属,2015,39(7):583-588. 被引量：6
-
4罗鑫,姚泽坤,秦春,葛苗苗,淡佳鹏,郭鸿镇.热处理对Ti-22Al-25Nb/TC11双合金焊接接头组织与性能的影响[J].金属热处理,2015,40(7):20-24. 被引量：7
-
5葛苗苗,姚泽坤,涂唯坚,郭鸿镇.退火对Ti-22Al-25Nb/TC11电子束焊接接头组织与拉伸性能的影响[J].金属热处理,2015,40(8):106-109. 被引量：3
-
6郭凡,郭鸿镇,王国庆,叶茂,孟令博,姜枫,刘昀.热处理制度对Ti-22Al-25Nb/Ti60双合金焊接接头组织与性能的影响[J].金属热处理,2016,41(8):85-88. 被引量：2
-
7朱玉斌,郭永环,郭妍,张亮.V型坡口多层多道焊温度场数值模拟[J].热加工工艺,2017,46(17):207-209. 被引量：3
-
8Yi-Jun Xu,Yong-Huan Guo,Hui Fan.Forecasting of mechanical properties of covered electrode containing La/CeO_2 based on fuzzy neutral network[J].Rare Metals,2018,37(2):161-166. 被引量：1
-
9刘莹莹,王梦婷,李洁洁,张乐.焊接电流对Ti2AlNb/TC18焊接界面性能及元素扩散的影响[J].材料热处理学报,2020,41(3):170-176.
-
10刘志强,王东君,祝世强,刘钢.Ti_(2)AlNb合金构件全流程模拟及组织-性能预测[J].材料科学与工艺,2022,30(2):1-8. 被引量：2
-
1胡建良,易幼平,黄始全.Analysis of isothermal forging process and mechanical properties of complex aluminum forging for aviation[J].Journal of Central South University,2014,21(7):2612-2616. 被引量：2
-
2SI Jia-yong,HAN Peng-biao,ZHANG Ji.Design for Isothermal Forging of Ti-46.5Al-2.5V-1.0Cr-0.3Ni Alloy[J].Journal of Iron and Steel Research(International),2010,17(8):67-73. 被引量：1
-
3Miaoquan LI, Shankun XUE, Aiming XIONG and Shenghui CHEN State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, China.Experimental Investigation and Numerical Simulation of the Grain Size Evolution during Isothermal Forging of a TC6 Alloy[J].Journal of Materials Science & Technology,2005,21(2):155-160. 被引量：3
-
4黄朝晖.Isothermal forging of γ-TiAl based alloys[J].中国有色金属学会会刊：英文版,2003,13(6):1325-1328.
-
5Xiao-Yun Song,Yan Li,Fei Zhang.Microstructure and tensile properties of isothermally forged Ni–43Ti–4Al–2Nb–2Hf alloy[J].Rare Metals,2013,32(5):475-479. 被引量：2
-
6贾崇林,葛昌纯,夏敏,谷天赋.Spray forming and mechanical properties of a new type powder metallurgy superalloy[J].Chinese Physics B,2015,24(11):556-562.
-
7WANG Ning Special Steel Technology Center,Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 200940,China.Baosteel's progressive advance in manufacturing high performance alloys[J].Baosteel Technical Research,2010,4(S1).
