期刊文献+

Electrochemical properties of high-power lithium ion batteries made from modified spinel LiMn_2O_4 被引量:2

Electrochemical properties of high-power lithium ion batteries made from modified spinel LiMn_2O_4
下载PDF
导出
摘要 A prismatic 204056-type high power lithium-ion battery was developed.Modified LiMn2O4 and carbonaceous mesophase sphere(CMS)were adopted as the cathode and anode,respectively.The effects of proportion of conductive carbon black in cathode and the rest time after discharge on the electrochemical properties of batteries were investigated.The electrochemical tests show that the proportion of conductive carbon black in cathodes affects the high rate capability and discharge voltage plateau distinctly.The battery with 3.0%of conductive carbon black in cathode shows excellent electrochemical performances when being charged/discharged within 2.5-4.2 V at room temperature.The discharge capacity at 20C rate is 94.4%of that at 1C rate,and the capacity retention ratio charged at 1C and discharged at 5C is 86.6%after 390 cycles at room temperature.The test result of impulse discharge at 50C for 5 s shows that the battery has outstanding high rate discharge performance when the battery is in the depth of charge of 90%,75%,60%,45%,30%and 15%.The battery also shows good charge performance.When the battery is charged at 0.5C,1C,2C and 4C,the ratios of capacity for constant current charge are 98.4%,96.4%,91.0%and 72.9%of the whole charge capacity,respectively.In addition,the rest time after discharge affects the cycle performance distinctly when the battery is discharged at high rate. A prismatic 2O4056-type high power lithium-ion battery was developed. Modified LiMn2O4 and carbonaceous mesophase sphere (CMS) were adopted as the cathode and anode, respectively. The effects of proportion of conductive carbon black in cathode and the rest time after discharge on the electrochemical properties of batteries were investigated. The electrochemical tests show that the proportion of conductive carbon black in cathodes affects the high rate capability and discharge voltage plateau distinctly. The battery with 3.0% of conductive carbon black in cathode shows excellent electrochemical performances when being charged/discharged within 2.5-4.2 V at room temperature. The discharge capacity at 20C rate is 94.4% of that at 1C rate, and the capacity retention ratio charged at 1 C and discharged at 5 C is 86.6% after 390 cycles at room temperature. The test result of impulse discharge at 50C for 5 s shows that the battery has outstanding high rate discharge performance when the battery is in the depth of charge of 90%, 75%, 60%, 45%, 30% and 15%. The battery also shows good charge performance. When the battery is charged at 0.5C, 1C, 2C and 4C, the ratios of capacity for constant current charge are 98.4%, 96.4%, 91.0% and 72.9% of the whole charge capacity, respectively. In addition, the rest time after discharge affects the cycle performance distinctly when the battery is discharged at high rate.
出处 《中国有色金属学会会刊:英文版》 EI CSCD 2009年第6期1494-1498,共5页 Transactions of Nonferrous Metals Society of China
基金 Project(2007CB613607)supported by the National Basic Research Program of China
关键词 锂离子电池 电化学性能 尖晶石LIMN2O4 高功率 改性 碳质中间相 高倍率放电 放电电压平台 lithium ion batteries LiMn2O4 electrochemical property rate capability
  • 相关文献

参考文献1

二级参考文献16

  • 1XIA Yong-yao, ZHOU Yun-hong, YOSHIO M J. Capacity fading on cycling of4V Li/LiMn2O4 cells [J]. J Electrochem Soc, 1997, 144(8): 2593-2600.
  • 2JANG D H, SHIN Y J, OH S M. Dissolution of spinel oxides and capacity losses in 4V Li/LiMn2O4 cells [J]. J Electrochem Soc, 1996, 143(7): 2204-2211.
  • 3TARASCON J M, MCKINNON W R, COOWAR F, BOWMER T N, AMATUCCI G, GUYOMARD D. Synthesis condition and oxygen stoichiometry effects on Li insertion into the spinel LiMn2O4 [J]. J Electrochem Soc, 1994, 141(6): 1421-1431.
  • 4ARORA P, WHITE R. Capacity fade mechanism and side reactions in lithium-ion batteries [J]. J Electrochem Soc, 1998, 145(10): 3647-3667.
  • 5TARASCON J M, WANG E, SHOKOOHI F K, MCKINNON W R, COLSON S. The spinel phase of LiMn2O4 as a cathode in secondary lithium cells [J]. J Electrochem Soc, 1991, 138(10): 2859-2864.
  • 6ROBERTSON A D, LU S H, AVERILL W F, HOWARD J. M^3+-modified LiMn2O4 spinel intercalation cathodes (Ⅰ): Ademetal effects on morphology and electrochemical performance [J]. J Electrochem Soc, 1997, 144(10): 3500-3504.
  • 7ARORA P, POPOV B N, WHITE R E. Electrochemical investigation of cobalt-doped LiMn2O4 as cathode material for lithium-ion batteries [J]. J Electrochem Soc, 1998, 145(3): 807-814.
  • 8LI Guo-hua, IKUTA H, VCHIDA T, WAKIHARA M. The spinel phase LiMyMn2-yO4 (M=Co, Cr, Ni) as the cathode for rechargeable lithium batteries [J]. J Electrochern Soc, 1996, 143(1): 178-182.
  • 9ZHANG D, POPOV B N, WHITE R E. Electrochemical investigation of CrO2.65-doped LiMn2O4 as cathode material for lithium-ion batteries [J]. J Power Sources, 1998, 76(1): 81-86.
  • 10CHAN H W, DUH J G, SHEEN S R. Microstmcture and electrochemical properties of LBO-coated Li-excess Li1+xMn2O4 cathode material at elevated temperature for Li-ion battery [J]. Electrochimica Aeta, 2006, 51(18): 3645-3651.

共引文献6

同被引文献21

  • 1夏熙.二氧化锰及相关锰氧化物的晶体结构、制备及放电性能(1)[J].电池,2004,34(6):411-414. 被引量:55
  • 2YU Zemin ZHAO Liancheng.Preparation and electrochemical properties of LiMn_(1.95)M_(0.05)O_4(M=Cr,Ni)[J].Rare Metals,2007,26(1):62-67. 被引量:5
  • 3Goodenough J B, Kim Y. Challenges for rechargeable Li batteries[J]. Chemistry of Materials, 2010, 22(3): 587-603.
  • 4YUE Hongjun, HUANG Xingkang, LU Dongping, et al. Hydrothermal synthesis of LiMn204/C composite as acathode for rechargeable lithium-ion battery with excellent rate capacity[J]. Electrochimiea Acta, 2009, 54(23): 5363-5367.
  • 5Taniguchi L. Powder properties of partially substituted LiMxMn2O4(M=A1, Cr, Fe and Co) synthesized by ultrasonies pray pyrolysis[J]. Materials Chemistry and Physics, 2005, 92(1): 172-,75.
  • 6Armstrong A R, Holzapfei M, Nova'k P, et al. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode[J]. Journal of the American Chemical Society, 2006, 128: 8694-8698.
  • 7Jung Y S, Cavanagh A S, Yan Yanfa, et al. Effects of atomic layer deposition of Al2O3 on the Li[Li0.20Mn0.54Ni0.13Co0.13]O2 cathode for lithium-ion batteries[J]. Journal of the Electrochemical Society, 2011,158(12): A1298-A1302.
  • 8LIU Yunjian, LIU Sanbing, Wang Yaping, et al. Effect of Mn02 modification on electrochemical performance of LiNio.2Li0.2Mn0.602 layered solid solution cathode[J]. Journal of Power Sources, 2013, 222: 455-460.
  • 9Shi S J, Tu J P, Tang Y Y, et al. Enhanced cycling stability of Li[Lio.2Mno.saNioA3Co0.t3]O2 by surface modification of MgO with melting impregnation method[J]. Electrochimica Acta, 2013 88: 671-679.
  • 10Li G R, Feng X, Ding Y, et al. A1F3-coated Li(Lio.17Ni0.25Mn0.s8)O2 as cathode material for Li-ion batteries[J]. Electrochimica Acta, 2012, 78:308-315.

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部