期刊文献+

高速半导体激光器组件的综合优化设计

原文传递
导出
摘要 高速半导体激光器组件的综合优化设计需要全面考虑激光器组件封装过程中的各种因素.在研究高速光电子器件的频响测试、建模分析和寄生补偿等技术的基础上,提出了一种高速半导体激光器组件的综合优化设计方法,并进行了半导体激光器的TO封装和优化实验,封装后组件的带宽达到10GHz,并且改善了带内平坦度和相频线性度等特性,验证了该方法的可行性.
出处 《科学通报》 EI CAS CSCD 北大核心 2009年第20期3030-3035,共6页 Chinese Science Bulletin
基金 国家自然科学基金(批准号:60820106004 60536010 60606019 60777029 60837001) 国家重点基础研究发展计划(编号:G2006CB604902 G2006CB302806) 国家高技术研究发展计划(编号:2009AA03Z409) 科技部重大国际合作项目(编号:2006dfa11880)资助
  • 相关文献

参考文献26

  • 1Mickelson A R, Basavanhally N R, Lee Y C. Optoelectronics Packaging. New York: Wiley & Sons, 1997.
  • 2Morton P A, Tanbun-Ek T, Logan R A, et al. Packaged 1.55 μm DFB laser with 25 GHz modulation bandwidth. Electron Lett, 1994, 30:2044--2046.
  • 3Schuster C, Kuchta D M, Colgan E G, et al. Package design and measurement of 10 Gbps laser diode on high-speed silicon optical bench. Proc Elect Performance Electron Packag, 2003, 63--66.
  • 4Yoon H J, Jun K N. Compact bidirectional optical module using ceramic blocks. IEEE Photon Technol Lett, 2004, 16:1954--1956.
  • 5Chen H N, Hwang R Y, Hsu J T, et al. Plastic-molded package of AlGaInP laser apparatus. Proc SPIE, 1996, 2683:42--49.
  • 6Liu J j, Olver K A, Lara M T, et al, High-yield flip-chip bonding and packaging of low-threshold VCSEL arrays on sapphire substrates. IEEE Trans Comp Packag Technol, 2003, 26:548--553.
  • 7Muoi T V. Integrated fiber optic transmitters and receivers for SONET/ATM applications. Proc ECTC, 1995, 1092--1095.
  • 8Lindgren S, Ahlfeldt H, Kerzar B, et al. Packaging of high speed DFB laser diodes. Proc ECOC, 1996, 1:97--102.
  • 9Kurata K, Yamauchi K, Kawatani A, et al. Low cost optical module packaging techniques for optical access network systems. ICICE Trans Electron, 1997, 80-C: 98--106.
  • 10Park S S, Song M K, Kang S G, et al. High frequency modeling for 10 Gbps DFB laser diode module packaging. In: Proc 46th Electron Comp Technol Conf, 1996, 884--887.

二级参考文献13

  • 1Ludwig R,Bretchko P. RF circuit design: theory and applications. Prentice Hall, 2002: 175.
  • 2Chen Z Y, Wang Y L, Liu Y, et al. Two-port calibration of test fixtures with OSL method. Microw Opt Technol Lett,2002,35(4):299.
  • 3Zhu N H, Qian C,Wang Y L, et al. Frequency limitation in the calibration of microwave test fixtures. IEEE Trans Microw Theory Tech, 2003,51(9): 2000.
  • 4Debie P,Martens L. Correction technique for on-chip modulation response measurements of optoelectronic devices. IEEE Trans Microw Theory Tech, 1996,43(6): 1264.
  • 5Hale P D,Clement T S, Williams D F,et al. Measuring the frequency response of gigabit chip photodiodes. IEEE J Lightw Technol,2001,19(9):1333.
  • 6On-wafer measurements using Agilent 8510 Network Analyzer and cascade microtech wafer probes, Agilent Technologies,Product Note 8510-6.
  • 7Tucker R S,Popo D J. Microwave circuit models of semiconductor injection lasers. IEEE Trans Microw Theory Tech,1983,31(3):289.
  • 8Hale P D,Williams D F. Calibrated measurement of optoelectronic frequency response. IEEE Trans Microw Theory Tech,2003,51(4):1422.
  • 9Ebberg A, Auracher F,Borchert B. 10Gbit/s transmission using directly modulated uncooled MQW ridge waveguide DFB lasers in TO package. Electron Lett, 2000,36(17): 1476.
  • 10Zhu N H,Wang Y L,Qian C,et al. Frequency bandwidth estimation of TO packaging techniques for laser modules. Optical and Quantum Electronics,to be published.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部