摘要
利用QTM—970图象分析仪研究了Ca/S和锻压比对5NiSCa钢中硫化物形态、大小及分布的影响。在锻压比(H)一定时,Ca/S对硫化物形态(L/B)的影响,符合L/B=M·e^(-N·Ca/S) 。随着Ca/S增加,硫化物形态改善。但Ca/S对硫化物大小几乎无影响。适当加大锻压比,有助于硫化物形态的改善及其细化。
Image Analyzer QTM-970 was used to study the effects of Ca/S and reduction ratio on theshape size and distribution of sulfides in 5NiSCa steel. The results show that when the reduc-tion ratio H is a constant, the relation between L/B and Ca/S may be expressed as L/B=M·e^(-N·Ca/S)Aa Ca/S increases, the shape of the sulfides is improve0. Ca/S has little influence on the size ofthe sulfides and the increase of reduction ratio is helpful to the improvement of the shape sizeand the size of sulfides.
出处
《钢铁》
CAS
CSCD
北大核心
1989年第9期38-42,共5页
Iron and Steel
基金
国家自然科学基金
