摘要
采用机械合金化法制备了Fe_(70)Zr_(10)B_(20)、Fe_(63)Co_7Zr_(10)B_(20)和Fe_(63)Ni_7Zr_(10)B_(20)合金。利用X射线衍射仪(XRD)研究了3种合金的机械合金化过程及晶化过程。Fe_(70)Zr_(10)B_(20)球磨50h后的合金由大量非晶相和少量晶态相组成,Co的添加对FeZrB非晶合金的形成起到了抑制作用;Ni的添加对FeZrB非晶合金的形成起到了促进作用。Fe_(70)-Zr_(10)B_(20)、Fe_(63)Co_7Zr_(10)B_(20)合金的晶化过程容易进行,而Fe_(63)Ni_7Zr_(10)B_(20)合金的晶化比较困难。
Fe70Zr10B20,Fe643Co7Zr10B20 and Fe63Ni7Zr10B20 alloys are prepared by mechanical alloying. Preparations and crystallization progresses of three alloys are studied by X-ray diffraction. Fe70Zr10B20 milled for 50h is composed of a lot of amorphous and a little of crystal. The glass formation is restrained by adding Co, but promoted by adding Ni. The crystallization progresses of Fe70Zr10B20 alloy and Fe643Co7Zr10B20 alloy are easy, but difficulty for Fe63Ni7 Zr10B20 alloy.
基金
吉林省科技发展计划项目(20082112)
吉林省教育厅"十一五"科研计划项目(2007158)
关键词
机械合金化
非晶
晶化
mechanical alloying, amorphous, crystallization