济钢1750m^3高炉炉前开口机的优化改造

Modification and optimization of the nozzle-tapping machine for the 1750 blast furnace at Jinan Iron and Steel Co.

济钢3座1 750 m3高炉炉前原使用的是液压、气动双控制开口机,该开口机存在使用周期短、维护成本高、维护难度大等缺陷.针对以上缺陷,将1号1750高炉作为试点,通过一系列优化改造,在不停产的情况下将气动开口机改为液压开口机,取得了良好的效果.

A hydraulic-pneumatic nozzle-tapping machine was originally employed for the three 1750 m3 blast furnaces at Jinan Iron and Steel Co.. The machine has the drawbacks of short service life, as well as big difficulties and high cost in maintenance, In view of the above drawbacks, a pure hydraulic nozzle-tapping machine was utilized for the 1# 1750 blast furnace, which was modified and optimized, and taken as the experiment site. Good results were attained by the modifffaction.