期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

硬态干式车削淬硬钢SKD11表面粗糙度试验研究 被引量：13

An Experimental Research on the Surface Roughness by Dry Cutting of Hardened Steel SKD11
下载PDF
导出
摘要 应用单因素法研究了PCBN刀具硬态干式切削淬硬钢SKD11过程中,进给量、切削速度、背吃刀量、刀尖圆弧半径和倒棱宽度等参数对表面粗糙度的影响规律。 The influence pattern of some cutting parameter , such as feed rate, cutting speed, cutting depth, nose radius and chamfer width on the surface roughness is researched , which is conducted by single factor method on Hardened Steel SKD11 during dry Cutting using PCBN Tools.
作者 朱学超 沈利平
机构地区 苏州市职业大学
出处 《制造技术与机床》 CSCD 北大核心 2009年第12期31-33,共3页 Manufacturing Technology & Machine Tool
基金 江苏省教育厅自然科学研究项目(05KJD460198) 校自然科学研究课题(SZK07L18 SZD08L18)
关键词 淬硬钢 硬态干式切削 表面粗糙度 Hardened Steel Dry Cutting Surface Roughness
分类号 TG84 [金属学及工艺—公差测量技术] TG711 [金属学及工艺—刀具与模具]
  • 相关文献

参考文献7

  • 1曹永泉,张弘弢,董海,李嫚.PCBN刀具干湿切削淬硬钢对比试验研究[J].工具技术,2006,40(5):19-21. 被引量：7
  • 2戴素江,邢彤,文东辉,袁巨龙,戴勇.精密硬态切削表面白层组织形态的研究[J].中国机械工程,2006,17(10):1007-1009. 被引量：13
  • 3李新龙.利用低温氮气和微量润滑技术开展高速铣削钛合金的研究:[硕士学位论文].南京:南京航空航天大学,2004.
  • 4陈涛,刘献礼.PCBN刀具硬态切削淬硬轴承钢GCr15表面粗糙度试验与预测[J].中国机械工程,2007,18(24):2973-2976. 被引量：28
  • 5ozel T. Modeling of Hard Part Machining: Effect of Insert Edge Preparation for CBN Cutting Tools. Journal of Materials Processing Technology, 2003,141 (2) :284-293.
  • 6Thlele J D, Melkote S N. Effect of Cutting Edge Geometry and Workpiece Hardness on Surface Generation in the Finish Hard Turning of AISI 52100 Steel. Journal of Materials Processing Technology,1999,94(2-3).
  • 7Gunnberg F,Escursell M,Jacobson M. The Influence of Cutting parameters on Residual Stresses andSurface Topography during Hard Turning of18MnCr5 Case Carburised Steel. Journal of Materials Processing Technology, 2006,174 ( 1-3 ).

二级参考文献17

  • 1文东辉.精密硬态切削的研究:[博士后研究报告].北京:清华大学,2004.
  • 2Klocke F,Brinksmeier E,Weinert K.Capability Profile of Hard Cutting and Grinding Processes.CIRP Annals,2005,54(2):557～580.
  • 3Poulachon G,Alber A,Schluraff M,et al.An Experimental Investigation of Work Material Microstructure Effects on White Layer Formation in PCBN Hard Turning.International Journal of Machine Tools & Manufacture,2005,45(1):211～218.
  • 4Smith S R.An Investigation into the Effects of Hard Turning Surface Integrity on Component Service Life:[Ph.D.dissertation].Georgia State:Georgia Institute of Technology,2001.
  • 5G Poulachon, AMoisan, I S Jawahir. Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools,Wear, 2001, 250: 576-586
  • 6Abdullah Kurt, Ulvi Seker. The effect of chamfer angle of polycrystalline cubic boron nitride cutting tool on the cutting forces and the tool stresses in finishing hard turning of AISI 52100 steel. Materials and Design,26,2005:351 - 356
  • 7W Y H Liew, S Yuan, B K A Ngoi. Evaluation of machining performance of STAVAX with PCBN tools.
  • 8Toenshoff H K, Arendt C, Ben- Amor R. Cutting Hardened Steel[J]. Annals of the CIRP, 2000,49 (2):1-19.
  • 9Liu C R, Mittal S. Single- step Super Finishing Using Hard Machining Resulting in Superior Surface Integrity[J]. International Journal of Flexible Manufacturing Systems ,2001,14(2) : 129-133.
  • 10Ozel T. Modeling of Hard Part Machining: Effect of Insert Edge Preparation for CBN Cutting Tools[J]. Journal of Materials Processing Technology, 2003, 141:284-293.

共引文献42

同被引文献109

引证文献13

二级引证文献42

制造技术与机床
2009年 第12期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部