期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

高精度CMOS Wildar多值电压带隙基准电路设计 被引量：2

Design of CMOS Wildar Bandgap Voltage Reference with High Precision Multi-Output
下载PDF
导出
摘要 基于经典Wildar带隙基准结构,通过单级高增益低失调运放及其闭环负反馈设计,将电压求和模式输出与电阻负载驱动紧密结合,同时增加简单的单管并联高阶补偿结构,实现了一种具有较大负载驱动能力的高精度多值低压基准输出,解决了经典基准电路在补偿精度与PSRR方面的局限性。CSMC 0.5μm CMOS工艺仿真结果表明,在-40~125℃,一阶补偿的温度系数为6×10-6/℃,输出电阻支路采用并联MOS管的高阶补偿后,温度系数下降到1.27×10-6/℃,低频下电源抑制比达到-57 dB。 A high precision Widlar bandgap voltage reference with multi-output, load-drive capability, and improved structure of single-stage high-gain operational amplifier was presented. The PSRR performance was significantly improved with a high-gain operational amplifier, and its temperature coefficient was reduced by a simple compensation structure which was realized with only a MOS transistor. Simulated in CSMC 0.5 μm CMOS process, it has a temperature coefficient in - 40 to 125 ℃ range of 6 × 10^-6/℃, and 1.27× 10^-6/℃ if second-order compensation is applied. Its PSRR is higher than - 57 dB.
作者 王永寿 吴金 郑丽霞 赵霞
机构地区 东南大学IC学院
出处 《半导体技术》 CAS CSCD 北大核心 2009年第12期1244-1247,共4页 Semiconductor Technology
关键词 带隙基准 低压多路输出 温度系数 电源抑制比 bandgap reference low-voltage multi-output temperature coefficient PSRR
分类号 TN432 [电子电信—微电子学与固体电子学]
  • 相关文献

参考文献6

  • 1GRAY P R,HURST P J,LEWIS S H,et al.模拟集成电路的分析与设计[M].北京:高等教育出版社,2005.
  • 2THAM K M, NAGARAJ K. A low supply voltage high PSRR voltage reference in CMOS process [J]. IEEE JSSC, 1995, 30 (5) : 586-590.
  • 3LEUNG K N, MOK K T. A sub-1-V 15 ppm/℃ CMOS bandgap voltage reference without requiring low threshold voltage device [J]. IEEE JSSC, 2002, 37(4) :526-530.
  • 4幸新鹏,李冬梅,王志华.A Near-1V 10ppm/℃ CMOS Bandgap Reference with Curvature Compensation[J].Journal of Semiconductors,2008,29(1):24-28. 被引量：8
  • 5JIANG T, YANG H Z. Bandgap reference design by means of multiple point curvature compensation [J] . Chinese J of Semiconductors, 2007, 28(4): 490-495.
  • 6BONI A. Op-Amps and startup circuits for CMOS band-gap references with near 1-V supply [J]. IEEE JSSC, 2002, 37 (10) : 1339-1342.

二级参考文献11

  • 1Widlar R J. New developments in IC voltage regulators. IEEE J Solid-State Circuits, 1971, SC-6 ( 1 ) : 2.
  • 2Brokaw P A. A simple three-terminal IC bandgap reference. IEEE J Solid-State Circuits, 1974, SC-9 (6) : 388.
  • 3Jiang Y, Lee E K F. Design of low-voltage bandgap reference using transimpedance amplifier. IEEE Trans Circuits Syst Ⅱ ,2000, 47 : 552.
  • 4Banba H, Shiga H, Umezawa A, et al. A CMOS bandgap reference circuit with sub-1-V operation. IEEE J Solid-State Circuits, 1999, 34 : 670.
  • 5Leung K N, Mok P K T. A sub-1-V 15-ppm/C CMOS bandgap voltage reference without requiring low threshold voltage device. IEEE J Solid-State Circuits, 2002,37 : 526.
  • 6Leung K N, Mok P K T, Leung C Y. A 2-V 23-μA 5.3-ppm/C curvature-compensated CMOS bandgap voltage reference. IEEE J Solid-State Circuits, 2003,38(3) : 561.
  • 7Audy J M. Bandgap voltage reference circuit and method with low TCR resistor in parallel with high TCR and in series with low TCR portions of tail resistor. US Patent,5291122. 1994.
  • 8Malcovati P, Maloberti F, Pruzzi M, et al. Curvature compensated BICMOS bandgap with 1V supply voltage. IEEE J Solid-State Circuits,2001,36:1076.
  • 9Razavi B. Design of analog CMOS integrated circuits. McGrawHill Companies, 2001.
  • 10Mok P K T,Leung K N. Design consideration of recent advanced low-voltage low-temperature-coefficient CMOS bandgap voltage reference. IEEE CICC, 2004 : 635.

共引文献11

同被引文献10

引证文献2

二级引证文献3

半导体技术
2009年 第12期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部