期刊文献+

Influence of Pre-Compressive Creep on Internal Friction Stress and Creep Parameters of Nickel-Base Single Crystal Superalloys 被引量:2

Influence of Pre-Compressive Creep on Internal Friction Stress and Creep Parameters of Nickel-Base Single Crystal Superalloys
下载PDF
导出
摘要 By means of pre-compressive creep treatment, the cubic γ′ phase in a nickel base single crystal superalloy is transformed into the P-type rafted structure. And the influence of the pre-compressive creep on the internal friction stress and creep lifetimes of the superalloy are investigated by means of the measurement of the creep curves and microstructure observation. Results show that, compared to the P-type structure alloy, the full heat treated state alloy displays a bigger internal friction stress value of dislocation motion during steady state creep and a longer creep lifetimes. The creep activation energies of the full heat treated and P-type structures alloys are measured to be 462 kJ/mol and 412 kJ/mol, respectively. Thereinto, the P-type rafted γ′ phase in the alloy is transformed into the N-type structure during tensile creep. And the N-type γ′ phase transformed from the P-type structure displays a shorter size in length, this is a main reason of the P-type structure alloy possessing a shorter creep lifetimes due to creep dislocation moving easily over the rafted γ′ phase. By means of pre-compressive creep treatment, the cubic γ′ phase in a nickel base single crystal superalloy is transformed into the P-type rafted structure. And the influence of the pre-compressive creep on the internal friction stress and creep lifetimes of the superalloy are investigated by means of the measurement of the creep curves and microstructure observation. Results show that, compared to the P-type structure alloy, the full heat treated state alloy displays a bigger internal friction stress value of dislocation motion during steady state creep and a longer creep lifetimes. The creep activation energies of the full heat treated and P-type structures alloys are measured to be 462 kJ/mol and 412 k J/mol, respectively. Thereinto, the P-type rafted γ′ phase in the alloy is transformed into the N-type structure during tensile creep. And the N-type γ′ phase transformed from the P-type structure displays a shorter size in length, this is a main reason of the P-type structure alloy possessing a shorter creep lifetimes due to creep dislocation moving easily over the rafted γ′ phase.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2009年第A03期28-32,共5页 Rare Metal Materials and Engineering
基金 Supported by the National Natural Science Foundation of China (No 50571070)
关键词 镍基单晶 合金 物理性能 结构分析 nickel-base single crystal superalloy P-type and N-type structure creep activation energy deformation features
  • 相关文献

参考文献13

  • 1Yu X F, Tian S G, Wang M Get al. Materials Science Forum[M]. Switzerland: Trans Tech Publications, 2007,539-543:2972.
  • 2MacKay R A, Ebert L J. Metall Trans A[J], 1985, 16A: 1969.
  • 3Nabarro F R N. Metall Mater Trans[J], 1996, 27A: 513.
  • 4Mughrabi H, Scheider W, Sass Vet al. Proceedings of the Fatigue'96[C]. 1996:789.
  • 5Pyczak F, Devrient B, Neuner F C. Acta Materialia[J], 2005, 53:3879.
  • 6Nabarro FRN. Metall Mater Trans A[J], 1996, 27A: 513.
  • 7Peng Z, Glatzel U, Feller-Kniepmeier M. Scripta Mater[J], 1996, 34:221.
  • 8Nathal M V, MacKay R A, Miner R V. Metall Trans A[J], 1989, 20:133.
  • 9Tian Sugui, Zhang Jinghua, Zhou Huihua. Materials Science and Engineering[J], 1999, A262:271.
  • 10Tin S, Pollock T M. Materials Science and Engineering[J], 2003, A348:111.

同被引文献8

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部