期刊文献+

改性酸酐增韧环氧树脂的制备及性能研究 被引量:1

Synthesis and properties of toughening epoxy resin with modified anhydride
下载PDF
导出
摘要 采用一缩二乙二醇改性甲基四氢邻苯二甲酸酐,在此基础上用改性酸酐增韧环氧树脂.用扫描电镜(SEM)、材料试验机、DMA等对固化产物的微观结构、力学性能和耐热性能进行了测试与表征.结果表明,当一缩二乙二醇与甲基四氢邻苯二甲酸酐的摩尔比为1:1.25时.制备的改性酸酐对环氧树脂具有明显的增韧效果.当改性酸酐的加入量为15%时,固化产物的增韧效果最佳,冲击断面呈现明显的韧窝状且力学性能和耐热性能基本保持不变. Toughening epoxy resin was synthesised based on the methyl-tetrahydrophalic anhydride modified by diethylene glycol. The microstructure, thermal property and mechanical properties of toughening epoxy resin were studied via SEM, DMA and mechanical properties testing. The results suggested that when the molar ratio between the diethylene glycol and methyl-tetrahydrophalic anhydride was 1.25 : 1, the resulted modified anhydride have the obvious toughed effect on epoxy resin. When the addition of modified anhydride was 15%, lots of dimples presented on the impacted surface and epoxy resin exhibited the best toughness, specially, its thermal property and mechanical properties unchanged.
出处 《华中师范大学学报(自然科学版)》 CAS CSCD 北大核心 2009年第4期609-612,共4页 Journal of Central China Normal University:Natural Sciences
基金 博士学科点专项科研基金项目(200804971004) 湖北省自然科学基金项目(2007ABA028)
关键词 一缩二乙二醇 改性酸酐 环氧树脂 增韧 耐热性能 diethylene glycol anhydride epoxy resin toughness thermal property
  • 相关文献

参考文献9

  • 1Velan T V T, Bilal I M. Aliphatic amine cured PDMS-epoxy interpenetrating network systemfor high performance engineering applications-development andeharaeterization [J].Bulletin of Materials Science,2000, 23(5):425-429.
  • 2Valette L, Wiechmann R. High-performance substrate from new epoxy resin and enhanced copper foil[J]. Circuit Word, 2004, 30(4): 20-26.
  • 3杨自善 陈迪炎.环氧树脂一氯化聚丙烯胶粘剂的研究.华中师范大学学报:自然科学版,1986,20(1):63-66.
  • 4Lin K F, Shieh Y D. Core-shell particles designed for toughening the epoxy resins 1I. Core-shell-particle toughened epoxy resins[J]. Journal of Applied Polymer Science, 1998, 70(12): 2313-2322.
  • 5何尚锦,石可瑜,沃华,梁晓勇,杜宗杰,张保龙.咪唑封端扩链脲改性环氧树脂E-51/酸酐MTHPA体系性能研究[J].高分子材料科学与工程,2003,19(1):69-72. 被引量:6
  • 6Lee J Y, Shim M J, Kim S W. Thermal decomposition kineties of an epoxy resin with rubber-modified curing agent[J]. Journal of Applied Polymer Science, 2001, 81(2) :479-485.
  • 7Lure G, Shim M J, Kim S W. Bulk properties of epoxy resin modified by epoxy-aminosilane eopolymers[J]. Polymer Inter- National, 1999, 48(9) :787-793.
  • 8李红,朱艳,宁荣昌,许磊.环氧树脂/酸酐固化体系的固化动力学及耐热性研究[J].粘接,2008,29(9):12-15. 被引量:14
  • 9张保龙,唐广粮,石可瑜,由英才,杜宗杰,黄吉甫.含液晶结构单元改性剂改性环氧树脂性能的研究——柔性链分子量的影响[J].南开大学学报(自然科学版),1999,32(2):1-5. 被引量:8

二级参考文献8

  • 1张保龙,张会旗,丁培元,由英才,杜宗杰,周杏弟,王涛,黄吉甫.含柔性间隔基的扩链脲增韧环氧树脂性能研究——环氧树脂/扩链脲/双氰双胺体系性能研究[J].高分子学报,1996,6(6):697-704. 被引量:20
  • 2SHIKe-yu ZHANGYu-ying ZHANGBao-long.南开大学学报 (Journal of Nankai University),1998,31(3):14-14.
  • 3ZHANGBao-long DINGPei-yuan XIEQing-lan.高等学校化学学报 (Chemcal Journal Chinese University),1991,(1):139-139.
  • 4ZHANGBao-long HUANGJi-fu DINGPei-yuan.高分子学报 (Acta Polymerica Sinica),1988,(4):278-278.
  • 5张保龙,高分子学报,1996年,6卷,697页
  • 6Hua Y Q, Zhang Z X, Q in Q. Journal of Applied Polymer Science ,2003,88 : 1410 - 1415.
  • 7Lee C L, Wei K H. Curing kinetics and viscosity change of a two part epoxy resin during mold filling in resin transfer molding process [ J ]. Journal of Applied Polymer Science, 2000, 77:2139 -2148.
  • 8谢瑞广,丘哲明,王斌,薛宁娟.中温固化环氧树脂体系的现状与发展[J].化学与粘合,2003,25(5):249-252. 被引量:23

共引文献25

同被引文献2

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部