期刊文献+

基于权因子的三次NURBS曲线推拉方法 被引量:1

Distorting method for cubic NURBS based on weights
下载PDF
导出
摘要 总结了更改1个或2个相邻权因子对NURBS曲线形状影响的一般规律,及根据新NURBS曲线形状来确定权因子的计算公式.在对前人研究成果的深入分析下,笔者发现并证明了通过权因子来使三次NURBS曲线朝任意方向推拉的有关性质,并提出根据修改后的三次NURBS曲线特征点的变化来推算相应1个或2个相邻权因子的计算方法.在针对指向非控制点方向的三次NURBS曲线推拉中,采用直接搜索法得出新曲线相邻两权因子的比值后根据权因子计算公式确定权因子.最后通过实例分析证明了所提出的方法与计算公式与实际相符. The general law of the impact of changes in one weight or two neighboring weights on the shape of NURBS curve was summarized as well as the law of determining weights according to the shape of NURBS curve. Based on the existing research achievements, the characteristics of distorting the NUBRS curve to random directions by weights were discovered and proved. Furthermore, the calculation method of the corresponding weights or two neighboring weights according to the changes of the feature points on the revised cubic NUBRS curve was proposed too. In the situation of distorting cubic NURBS at the direction of non-controlling point, firstly, the ratio of the new curve's two neighboring weights was obtained by directly searching method, and then the weights were determined according to the weight calculation formula. Finally, examples were used to demonstrate that the proposed method agree with the reality well.
出处 《工程设计学报》 CSCD 北大核心 2009年第6期444-446,451,共4页 Chinese Journal of Engineering Design
关键词 非均匀有理B样条 权因子 基函数 曲线推拉变形 NURBS weight base function shape of distorting curve
  • 相关文献

参考文献8

  • 1PIEGL L. Modifying the shape of rational B-splines, part 1: curves[J]. Computer Aided Design, 1989, 21 (8) :509-518.
  • 2PIEGL L. On NURBS: a survey[J]. IEEE Computer Graphics and Applications, 1991, 11(1):55-71.
  • 3AU C K, YUEN M F. Unified approach to NURBS curve shape modification[J]. Computer Aided Design, 1995, 27(2) :85-93.
  • 4FARIN G. From conics to NURBS: a tutorial and survey[J]. IEEE CG & A, 1992, 1(5):78-86.
  • 5JUHASZ I, HOFFMANN M. Constrained shape modification of cubic B-spline curves by means of knots[J]. Computer Aided Design, 2004(36):437-445.
  • 6张国华,杨兴强,张彩明.基于权因子的NURBS曲线形状调整[J].计算机辅助设计与图形学学报,2004,16(10):1396-1400. 被引量:22
  • 7陈凯云,谢晓芹.节点矢量影响NURBS曲线的规律研究与应用[J].机械工程学报,2008,44(10):294-299. 被引量:8
  • 8任绍忠,王国瑾.曲线曲面拟合中型值点参数的最优化[J].中国图象图形学报,2006,11(1):96-102. 被引量:8

二级参考文献27

  • 1Hoschek J.Intrinsic parametrization for approximation[ J].Computer Aided Geometric Design,1988,5(1):27 ~ 31.
  • 2Golub G,Pereyra V.The differentiation of pseudo-inverse and nonlinear least-squares problems whose variables separate [ J ].Society for Industrial and Applied Mathematics,Journal of Numerical Analysis,1973,10(2):413 ~432.
  • 3Golub G,Van L C.Matrix computations[ M].Baltimore,Maryland,USA:The Johns Hopkins University Press,1996:38 ~56.
  • 4Rao C,Mitra S.Generalized inverse of matrices and it's applications[ EB/OL].http://shum.huji.ac.il/~ ritov/Lab/lib.btm,1971/2002.
  • 5Nielson G.Coordinate free scattered data interpolation [ A ].In:Schumaker L,Chui C,Utreras F (Eds):Topics in Multivariate Approximation [ C ],New York:Academic Press,1987:175 ~ 184.
  • 6Carlos F B,Tim P.Total least squares fitting of Bézier and B-spline curves to ordered data [ J ].Computer Aided Geometric Design,2002,19(4):275 ~289.
  • 7Piegl L A,Tiller W.Parametrization for surface fitting in reverse engineering[ J].Computer-Aided Design,2001,33 (8):593 ~603.
  • 8清源计算机工作室.MATLAB 6.0高级应用-图形图象处理[M].北京:机械工业出版社,2001:78~79.
  • 9Piegl L, Tiller W. Curve and surface constructions using rational B-splines[J]. Computer-Aided Design, 1987, 19(9): 485~498
  • 10Piegl L. Modifying the shape of rational B-splines, Part 1: Curves[J]. Computer-Aided Design, 1989, 21(8): 509~518

共引文献35

同被引文献10

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部