摘要
器件结构是影响有机发光器件(OLED)性能的重要因素之一。采用8-hydroxyquinoline-aluminum(AlQ)作为发光层(EML)和电子传输层(ETL),polyvinylcarbazole(PVK)作为空穴传输层(HTL),制备了具有有机小分子/聚合物异质结结构的OLED器件,通过其电压-电流-发光亮度(V-J-B)特性测试,研究了HTL的引入及其膜厚对器件性能的影响。实验结果表明,HTL的引入有效地改善了OLED的光电性能,同时HTL膜厚对器件性能具有显著影响,当HTL膜厚为20 nm时,所制备的OLED器件具有最小的驱动电压和启亮电压、最大的发光亮度和发光效率。
The device construction plays an important role in improving the optoelectronic performance of organic electroluminescence devices （OLEDs）. Heterojunction OLEDs with a configuration of glass/ITO/PVK/AlQ/Mg/A1 were fabricated by using 8-hydroxyquinolinealuminum （AIQ） as the emission layer （EML） and electron transport layer （ETL） and polyvinylcarbazole （PVK） as the hole transport layer （HTL）. The effect of the HTL thickness on the performance of OLEDs was investigated with respect to the driving voltage, turn-on voltage, electroluminescence brightness and efficiency of the devices. Experimental results demonstrate that the optical and electrical properies of OLEDs are closely related to the HTL thickness. The device fabricated with the HTL thickness of 20 nm possesses the best photoelectric properties such as the minimum driving voltage and turn-on voltage, and the maximum electroluminescence brightness and efficiency.
出处
《半导体光电》
CAS
CSCD
北大核心
2009年第6期860-862,877,共4页
Semiconductor Optoelectronics
基金
湖北省自然科学基金项目(2009CDB166)
