摘要
实现了太阳能LED路灯综合控制系统中太阳能逆变、蓄电池充电、LED照明组件驱动子系统控制方案与电路设计,并对相关技术进行了分析。逆变子系统采用DC/DC升压与DC/AC逆变分段控制,DC/DC段采用最大功率跟踪(MPPT)稳定输出直流,DC/AC段采用电压外环电流内环控制并结合无功功率检测反馈和电流前馈控制的综合控制技术。蓄电池充电子系统采用分段充电策略与控制技术来保证电池组充分充电,避免蓄电池被过充以确保蓄电池能够长周期稳定工作。最后通过对各种白光LED驱动方案的比较,确定了白光LED最佳驱动方案为恒电流驱动脉宽调制(PWM)控制亮度。
Three main subsystems included in comprehensive control system of solar-energy high-power whitebrightness LED street lamp were designed in the paper. The three main subsystem are inversion subsystem of solar power, battery charging subsystem and driving subsystem of LED luminous device. The control technology of the three subsystem were analyzed and studied. Inversion subsystem of solar power was divided into constant current increasing voltage section of DC/DC and inversion section of DC/AC. The technology of MPPT（maximum power point tracker） was adopted to output stable constant current in the control section of DC/DC. The dual-loop control structure was adopted in the inversion section of DC/AC. The voltage was controlled in outer-loop and the current was controlled in inner-loop. And the control technology of reactive power feedback and current feedforward were integrated with dual-loop control technology in the section of DC/AC,too. The method and control technology of sectional charging was adopted in the storage battery charging subsystem to make sure to avoid the storage cells to be overcharged and work in the stable status for long period.The best optimum driving scheme for high power white brightness LED street lamp was defined, that LED street lamp is drived by constant current and the brightness of the street lamp is regulated by PWM technology at last.
出处
《发光学报》
EI
CAS
CSCD
北大核心
2009年第6期892-897,共6页
Chinese Journal of Luminescence
基金
大庆市科技攻关项目(5GG2006-001)资助
