摘要
用经自制复合改性剂ＭＴ－Ⅲ处理后的轻质ＣａＣＯ３填充ＰＶＣ制备ＰＶＣ电缆料，在相同填充量时，所得制品的力学性能及加工性能均得到有效改善．采用复合增塑剂Ｓｂ２Ｏ３能有效地改善制品的阻燃性．当复合改性剂ＭＴ－Ⅲ用量为１．５份，轻质ＣａＣＯ３用量为８０份时，所制得ＰＶＣ电缆料各项性能最佳，均达到ＧＢ８８１５对Ｈ－７０ＰＶＣ电缆料的要求，且生产成本低，阻燃性及加工性能较好．
The light calcium carbonate(CaCO 3) was surface treated with self made complex modifier MT Ⅲ.The PVC cable compound filled with it was prepared.At same amounts of CaCO 3,the mechanical and processing properties of the products was all efficiently improved.To use complex plasticizer and antimony trioxide(Sb 2O 3) can efficiently improved the flame retarding property of the products when the content of complex modifier MT Ⅲ is 1.5 share and the content of CaCO 3 is 80 share,the properties of PVC cable compound is best.The highly loading and flame retarding PVC cable compound can not only meet the properties required by GB 8815 88,but also have lower cost,fine properties of flame retarding and processing.
出处
《郑州轻工业学院学报》
1998年第3期14-18,共5页
Journal of Zhengzhou Institute of Light Industry（Natural Science）
关键词
填充
聚氯乙烯塑料
电缆料
复合改性剂
阻燃性
filled
polyvinyl chloride plastics
cable compound
compound modifier
fire resistance
