期刊文献+

A Method on Analog Circuit Fault Diagnosis with Tolerance

A Method on Analog Circuit Fault Diagnosis with Tolerance
下载PDF
导出
摘要 In this paper, it is proved that the direction of the node-voltage difference vector, which is the difference between the node-voltage vector at faulty state and the one at the nominal state, is determined only by the location of the faulty clement in linear analog circuits. Considering that the direction of the node-voltage sensitivity vector is the same as the one of the node-voltage difference vector and also considering that the module of the node-voltage sensitivity vector presents the weight of the parameter of faulty element deviation relative to the voltage difference, fault dictionary is set up based on node-voltage sensitivity vectors. A decision algorithm is proposed concerned with both the location and the parameter difference of the faulty element. Single fault and multi-fault can be diagnosed while the circuit parameters deviate within the tolerance range of 10 %. In this paper, it is proved that the direction of the node-voltage difference vector, which is the difference between the node-voltage vector at faulty state and the one at the nominal state, is determined only by the location of the faulty clement in linear analog circuits. Considering that the direction of the node-voltage sensitivity vector is the same as the one of the node-voltage difference vector and also considering that the module of the node-voltage sensitivity vector presents the weight of the parameter of faulty element deviation relative to the voltage difference, fault dictionary is set up based on node-voltage sensitivity vectors. A decision algorithm is proposed concerned with both the location and the parameter difference of the faulty element. Single fault and multi-fault can be diagnosed while the circuit parameters deviate within the tolerance range of 10 %.
出处 《Journal of Electronic Science and Technology of China》 2009年第4期297-302,共6页 中国电子科技(英文版)
基金 supported by Program for New Century Excellent Talents in University under Grant No.NCET-05-0804
关键词 Analog circuit fault diagnosis fault dictionary node-voltage difference vector sensitivity vector. Analog circuit fault diagnosis, fault dictionary, node-voltage difference vector, sensitivity vector.
  • 相关文献

参考文献1

二级参考文献14

  • 1Fedi G, Liberatore A, Luchetta A. A symbolic approach to the fault location in analog circuits[C].Proc. ISCAS '96, Atlanta, 1996: 810-813.
  • 2Catelani M, Fedi G, Giraldi S, et al. A new symbolic approach to the fault diagnosis of analog circuits[C]. Proc. IMTC'96, Bruxelles, 1996:1182-1185.
  • 3Manetti S. a New approach to automatic symbolic analysis of electric circuits[C]. IEEE Proceedings Curcuits, Devices & Systems, 1991, 138(1): 22-28.
  • 4Catelani M, Fedi G, Luchetta A. A new symbolic approach for testability measurement of analog networks[C]. Proc. Melecom '96, Bari, 1996:517-520.
  • 5Catelani M, Giraldi S. Fault diagnosis of analog circuits of electric circuits with model-based technique[C]. Proc. IMTC 98, St. Paul, MN, USA, 1998: 501-504.
  • 6Fernandez F V, Wambacq P, Gielen G. Symbolic analysis of large analog integrated circuits by approximation during expression generation[C]. Proc. Int. Symposium on Circuits and Systems, London, 1994: 25-28.
  • 7Walter Daems, Georges Gielen, Willy Sansen. Circuit simplification for the symbolic analysis of analog integrated circuits[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2002, 21(4):395-407.
  • 8Michal Tadeusiewicz, Stanislaw Halgas, Marek Korzybski. An algorithm for soft-fault diagnosis of linear and nonlinear circuits[J]. IEEE Transactions on Circuits and Systems[J]. 2002, 49(11): 1648-1653.
  • 9Alex Doboli, Ranga Vemuri. A regularity-based hierarchical symbolic analysis method for large-scale analog networks[J]. IEEE Transactions on Circuits and Systems, 2001, 48(11): 1054-1068.
  • 10Walter Daems, Georges Gielen, Willy Sansen. Circuit simplification for the symbolic analysis of analog integrated circuits[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2002, 21(4): 395-407.

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部