期刊文献+

Ti-Si-Al-N纳米复合膜的组织与性能 被引量:3

Microstructure and properties of Ti-Si-Al-N nano-composite films
下载PDF
导出
摘要 采用磁控反应溅射法制备了一系列Al含量不同的Ti-Si-Al-N纳米复合薄膜,采用X射线衍射仪、扫描电子显微镜及配套能量色散谱仪研究了Al含量对薄膜组织结构、硬度及高温抗氧化性的影响。结果表明:Ti-Si-Al-N薄膜点阵常数随Al含量的增加呈下降趋势;Al含量增加到6.48at%时出现h-AlN相,此时薄膜具有最高的硬度,约33GPa;薄膜的抗氧化温度提高到约900℃,但Al含量较高易导致薄膜晶粒在高温下长大。 Ti-Si-Al-N nano-composite films with different Al content were fabricated by reactive magnetron sputtering technique.The microstructure and properties of these films were investigated by means of X-ray diffraction,scan electron microscopy and energy dispersive spectrum analysis.The results show that with increasing of Al content,the lattice parameter of the composite films decreases. As the Al content increases up to 6.48 at%,h-AlN phase forms,and the films get the maximum microhardness of 33GPa.Oxidation temperature of the composite films increases to 900℃ with the addition of Al,however,the higher Al content may lead to grain growth of the films at high temperature.
出处 《材料热处理学报》 EI CAS CSCD 北大核心 2009年第6期144-148,共5页 Transactions of Materials and Heat Treatment
基金 国家自然科学基金资助项目(50574044)
关键词 Ti-Si-Al-N复合膜 显微硬度 高温抗氧化性 磁控反应溅射法 Ti-Si-Al-N nano-composites micro-hardness oxidation resistance reactive magnetron sputtering
  • 相关文献

参考文献24

  • 1Munz W D. Titanium aluminum nitride films: a new alternative to TiN coatings[J]. J Vac Sci Technol A, 1986, 4(6) : 2717 - 2725.
  • 2Oliver W C, Pharr G M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentat ion experiments [J]. J Mater Res, 1992, 7(6) : 1564- 1583.
  • 3Shum P W, Zhou Z F, Li K Y, et al. Structural and mechanical properties of titanium-aluminium-nitride films deposited by reactive close-field unbalanced magnetron sputtering[J]. Mater Sci Eng B, 2003, 100(2): 199-203.
  • 4Vaz F, Rebouta L, Goudeau P, et al. Characterization of Ti1-xSixNy nanocomposite films[J]. Surf Coat Technol, 2000, 133 - 134:307 - 313.
  • 5Diserens M, Patscheider J, Levy F. Improving the properties of titanium nitride by incorporation of silicon[J]. Surf Coat Technol, 1998, 108- 109: 241- 246.
  • 6Veprek S. The search for novel, superhard materials[J]. J Vac Sci Technol A, 1999,17:2401.
  • 7Veprek S, Reiprich S. A concept for the design of novel superhard coatings[J]. Thin Solid Films, 1995, 268 (1 -2): 64- 71.
  • 8Ning Jiang, Shen Y G, Zhang H J, et al. Superhard nanocomposite Ti-Al-Si-N films deposited by reactive unbalanced magnetron sputtering[J]. Materials Science and Engineering B, 2006, 135(1) : 1 - 9.
  • 9Rafaja Poklad A, Klemm V, Schreiber G, et al. Microstructure and hardness of nanocrystalline Ti1-x-yAlxSiyN thin films[J]. Materials Science and Engineering A, 2007, 462(I - 2) : 279 - 282.
  • 10Vennemann A, Stock H R, Kohlscheen J, et al. Oxidation resistance of titanlum-aluminium-silicon nitride coatings[J]. Surf Coat Technol, 2003, 174- 175:408 - 415.

二级参考文献52

共引文献42

同被引文献76

引证文献3

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部