摘要
论述了实验室中固硫剂固硫率的测定方法,试验研究了Ca/S对不同煤样固硫率的影响,并对以Ca(OH)2为固硫吸收剂,Mg,Si,Al氧化物为固硫添加剂的型煤在高温燃烧过程中的固硫效果进行了研究,通过正交试验确定出最好的添加剂比例。
Discussed is the method for determination of sulfur fixation efficiency at laboratory;experimental study conducted on sulfur-fixation effect against Ca/S ratio,and on the same in high-temperature combustion of coal briquette with calcium hydroxide as the sulfur absorbant and oxide of Mg,Si,and Al,the additive;the best additive ratio determined by orthogonal experimental.
出处
《煤炭加工与综合利用》
CAS
2009年第6期40-42,共3页
Coal Processing & Comprehensive Utilization
关键词
型煤
固硫剂
添加剂
正交试验
研究
coal briquette
sulfur-fixation agent
additive
orthogonal experimental
investigation