基于钛合金砂带磨削的磨削率、表面质量及砂带寿命性能试验研究

Experimental Research on Removal Rate,Surface Quality and Life Expectancy of Belt Based on the Belt Grinding Titanium Alloy

针对钛合金磨削加工磨削率低,砂带使用寿命短以及表面质量差等问题,文章分别用正交实验和单因素实验对砂带磨削钛合金的磨削率及表面质量进行了一系列的性能实验研究,得到了十分有用的结论。论文的研究不但可以改善钛合金的表面质量,提高钛合金的磨削率,而且有助于扩大钛合金的应用范围,延长砂带的使用寿命,对生产实践有理论指导意义。

For titanium grinding grinding rate is low and short belt life, as well as poor surface quality, we were single factor experiments and orthogonal experimental titanium alloys for the abrasive belt grinding and surface grinding rate the quality of a Experimental study of the performance series has been a lot of very useful conclusions. This study will not only improve the surface quality of titanium alloys, titanium alloys improve grinding rate, but also to expand the scope of application of titanium alloys to extend the useful life of abrasive belt on the production practice has theoretical significance.