期刊文献+

摩托车无级变速器调速特性分析 被引量:1

Speed characteristic analysis of continuously variable transmission for motorcycles
下载PDF
导出
摘要 针对雪橇摩托车V型橡胶带无级自动变速器起步打滑和调速困难的问题,通过对主动带轮的轴向受力仿真分析,发现了导致打滑现象出现的主要原因;采用双象限调速蹄块新结构,分析了双象限调速蹄块的调速特性。分析结果表明:双象限调速蹄块不仅可以有效地解决V型橡胶带无级自动变速器起步打滑的问题,提高无级变速系统的传动效率,同时也能较好地改善雪橇摩托车无级变速传动系统的调速特性。 To solve the problems of V-belt's slippage during starting phase and the difficulty of the ratio change of snowmobile's rubber V-belt clutch system, the main reason of the V-belt's slippage is found based on the axial force analysis of the primary clutch. Then the speed characteristic of the continuously variable transmission with dual quadrant flyweight is analyzed. The results show that the dual quadrant flyweight not only solves the problem of the V-belt's slippage during starting phase effectively, but also increases the transmission efficiency of the clutch system, and improves the characteristic of ratio change of the snowmobile's rubber V-belt clutch system.
出处 《重庆大学学报(自然科学版)》 EI CAS CSCD 北大核心 2010年第1期25-30,共6页 Journal of Chongqing University
基金 国家自然科学基金资助项目(50475066) 天津市应用基础及前沿技术研究项目(09JCYBJCO4800)
关键词 摩托车 无级变速传动 速比 调速机构 调速特性 motorcycles continuously variable transmission ratio ratio change flywheel speed characteristic
  • 相关文献

参考文献15

  • 1CARBONE G, MANGIALARDI L, BONSEN B, et al. CVT dynamics: theory and experiments [J]. Mechanism and Machine Theory, 2007, 42(4) : 409-428.
  • 2SHEU K B, HSU T H. Design and implementation of a novel hybrid electric-motorcycle transmission [J]. Applied Energy,2006, 83(9) : 959- 974.
  • 3MARTTTYKHIN M Y. Dependence of reduction ratio of V-belt variable-speed drive on the loading degree and friction forces in its mobile joints[J]. Avtomobil'naya Promyshlennost, 2005(7):16 -19.
  • 4任大鹏,秦伟.摩托车V型皮带式无级变速器的力学分析[J].机械传动,2005,29(2):21-24. 被引量:10
  • 5胡晓,何玉林,邓海平,李霄林.基于摩托车总体设计的一种推理方法[J].重庆大学学报(自然科学版),2006,29(2):19-22. 被引量:1
  • 6HAWORTH N, NIELSON A. Motor scooters and mopeds: are increasing sales translating into increasing crashes? [ J ]. Transportation Research Record: Journal of Transportation Search Board, 2008 (2074) : 69-76.
  • 7KI.ASSEN T W G I., BONSEN B, VAN DE MEERAKKER K G O, et al. The empact CVT: modeling, simulation and experiments [J]. International Journal of Modeling, Identification and Control, 2008, 3 (3):286-296.
  • 8SHEU K B, HSU T H. Design and implementation of a novel hybrid-electric motorcycle transmission [ J ]. Applied Energy, 2006, 83(9): 959-974.
  • 9KONG L Y, PARKER R G. Mechanics and sliding friction in belt drives with pulley grooves [J]. Journal of Mechanical Design, Transactions of the ASME, 2006, 128(2): 494 502.
  • 10PELLICANO F, FREGLENT A, BERTUZZI F, et al. Primary and parametric non-linear resonances of power tr ansmission belt : experimental and theoretical analysis[J]. Journal of Sound and Vibration, 2001,244 (4) : 669-684.

二级参考文献13

共引文献9

同被引文献5

  • 1Cammalleri M. A New Approach to the Design of a Speed Torque- Controlled Rubber V- Belt Variator[J]. Journal of Automobile Engineering, 2005,219(12) : 1413 - 1427.
  • 2Hyunsuk K, Heera Lee, Hanlin S, et al. Steady State and Transient Characteristics of a Rubber Belt CVT with Mechanical Actuatiors [J]. Journal of Mechanical Science and Technology, 2002, 16(5) : 639 - 646.
  • 3Nouis R. Super Torquer Systems[J]. SnowTech Magazine, 1999(9):57 - 62.
  • 4陈德强,王红,商跃进.铁路货车变刚度弹簧组计算机辅助设计系统研发[J].兰州交通大学学报,2009,28(6):91-94. 被引量:3
  • 5朱才朝,刘怀举,杜雪松,王海霞,田佳佳.橡胶带式CVT特性研究现状综述[J].汽车工程,2010,32(6):519-523. 被引量:6

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部