摘要
以加大半径的新构形齿轮刀具加工斜齿轮为例,通过分析切齿运动,研究了被切齿轮的齿数、螺旋角、刀具的标注角度、头数及加大半径量对工作角度的影响,并通过切齿实验进行了验证,为新构形齿轮刀具的设计和制造提供了理论依据。
Taking the hobbing of bevel gear by using the new gear hob with an increased radius as an example, by analyzing the cutting motions, the influences of the bevel gear＇ s teeth number, spiral angle and the hob＇ s signed angles, thread number and increased radius on the hob＇s working angles were researched, and a cutting experiment and calculating example were also pre- sented. The research result provides the theoretical basis for the new gear hob＇s design and manufacture.
出处
《工具技术》
2010年第1期41-43,共3页
Tool Engineering
基金
吉林省科技发展计划项目(20080533)
