期刊文献+

高温连铸坯表面缺陷脉冲电涡流检测方法研究 被引量:5

Surface Defect Inspection by Pulsed Eddy Current for Hot Continuous Casting Slab
原文传递
导出
摘要 高温铸坯表面缺陷在线检测对降低生产成本、提高铸坯的热送热装和直接轧制率具有重要意义。提出采用脉冲电涡流检测方法,对高温铸坯表面及近表面缺陷进行在线无损检测。介绍了脉冲电涡流高温铸坯表面缺陷检测方法试验装置,试验研究了脉冲电涡流探测器检测线圈信号的时域特征和频域特征,并给出缺陷信号特征提取方法。研究成果为进一步研究高温铸坯表面缺陷无损探伤装置提供理论基础和技术支撑。 On-line surface defect inspection in continuous casting has important significance for reducing production cost and improving hot charging-rolling rate.Novelty pulsed eddy current is proposed to on-line and non-destructive detect defects on hot slab surface and near-surface in real time.Firstly,the pulsed eddy current inspection theory and experimental device are introduced in this paper;then,the output signal of pulsed eddy current probe coil is analyzed with time-domain and frequency domain signal process and feature extraction method for defect signal is given through experiment study.The research results can provide a theoretical basis and technical support for further study of hot slab non-destructive inspection system.
出处 《连铸》 2010年第1期42-46,共5页 Continuous Casting
基金 重庆市自然科学基金资助(CSTC 2008BB0162)
关键词 连铸坯 无损探伤 表面质量 脉冲电涡流 continuous casting slab non-destructive test(NDT) surface quality pulsed eddy current
  • 相关文献

参考文献9

  • 1Edwards R S , Sophian A , Dixon S et al. Data Fusion for Defect Characteristic Using a Dual Probe System [J]. Sensors and Actuators,2008, 144(2) :222.
  • 2Manuchehr Soleimani, William R B Lionheart, Antony J Peyton, et al. A Three-Dimensional Inverse Finite-Element Method Applied to Experimental Eddy-Current Imaging Data [J]. IEEE Transactions on Magnetics, 2006, 12 (5):1560.
  • 3Philip MEILLAND, Maizieres-les-Metz. Novel Multiplexed Eddy Current Array for Surface Crack Detection on Rough Steel Surface[J]. EC NDT, 2006, 4 (8):1.
  • 4贾慧明,范弘,张克,秦义忠,张嘉懿.1100℃以上高温连铸板坯表面缺陷的模拟在线无损检测[J].钢铁研究学报,1994,6(1):81-86. 被引量:14
  • 5Philip MEILLAND, Maizieres-les-Metz. Novel Multiplexed Eddy-Current Array for Surface Crack Detection on Rough Steel Surface [J]. ECNDT, 2006, 4 (8):1.
  • 6Jun Youn Lee, Soon Bok Lee, Jae Kyung Yi. Ultrasonic Transmission Characteristics of Continuous Casting Slab for Medium Carbon Steel [J]. Key Engineering Materials,2005, 2(9):2201.
  • 7EWARYST RAFAJLOWICZ , MAREK WNUK , WOJCIECH RAFAJLOWICZ. Local Detection of Defects From Image Sequences [J]. Int. J. Apply. Math. Computer. Science, 2008, 18 (4) : 581.
  • 8Hajime KITAGAWA, Akira FUJII, Shigeru MIYAKE. An Automatic Surface Detection System for Hot Ingot Casting Slabs Using an Infrared Scanning Camera and Image Processors[J]. Transactions ISIJ, 1981,21(9) :9.
  • 9Manuchehr Soleimani, William R. B. Lionheart, Antony J. Peyton, et al. A Three-Dimensional Inverse Finite Element Method Applied to Experimental Eddy-Current Imaging Data [J]. Ieee Transactions on Magnetics, 2006,12(5) : 1560.

二级参考文献1

  • 1贾慧明,1991年

共引文献13

同被引文献62

引证文献5

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部