摘要
采用电镀技术制备新型复合锌基钎料,借助于差热分析(DTA)、X射线衍射(XRD)等手段对钎料的性能进行分析。分析结果表明:新型复合钎料熔点与普通钎料相比,略高于普通钎料;同一钎焊条件下,新型复合钎料润湿性优于普通钎料,且其钎焊接头的强度高于普通钎料。
The new composite solder was prepared by means of plating technology. The property of the filler metal was analyzed by means of DTA, XRD. It was shown that the melting point of new composite zinc-based filler metal was a littler higher than the ordinary filler metal with DTA. The wettability of new composite zinc-based filler metal was better than the ordinary filler metal and the new composite type of soldering was higher than the strength of welded joints ordinary solder under the same soldering parameters.
出处
《焊接技术》
北大核心
2010年第1期50-52,共3页
Welding Technology
关键词
新型复合钎料
电镀
熔点
润湿性
强度
new composite zinc-based filler metal, plating, melting point, wettability, strength
