摘要
研究了热处理对Zn-11%Al-8%Cu-Mg合金组织性能的影响。结果表明,热处理后锌合金晶粒细化,组织分布更加均匀,共晶组织的形貌变得圆整;热处理后的抗拉强度和伸长率增加,但布氏硬度有所下降,综合性能得到改善。
The microstructure and mechanical properties of Zn-11% Al-8% Cu-Mg alloy after heat treatment were investigated in this paper. The results show that the refined grains, more uniform microstructure and rounder eutectic structures are obtained after heat treatment. The tensile strength and elongation increase, while the Brinell hardness decreases slightly, and the over-all properties are improved after heat treatment.
出处
《铸造技术》
CAS
北大核心
2010年第1期72-74,共3页
Foundry Technology
基金
甘肃省科技支撑项目(编号:0708GKCA057)
关键词
锌合金
热处理
组织
力学性能
Zinc alloy
Heat treatment
Microstructure
Mechanical property