期刊文献+

环氧树脂作为相容剂的研究进展 被引量:3

Recent Development of Epoxy Compatibilizer
下载PDF
导出
摘要 高分子共混物中组分的不相容性会导致共混物的性能下降。因此,对高分子共混物的增容是很必要的。环氧树脂具有很高的反应活性,价格低廉,且在同时提高聚合物的强度和韧性方面大有发展,文中对环氧树脂作为增容剂的增容机理及其对共混物性能的影响、应用体系以及影响增容的各种因素作了分析和评述,对这一领域的发展趋势进行了展望。 The immiscibility of polymer blends results in products with inferior properties than the average of the base polymers. Research on compatibilizer is particularly valuable. Epoxy has been demonstrated as a low cost and high chemical reactivity compatibilizer, it has a bright future in increase the strength and toughness of polymer blends at the same time. In this paper, the mechanism of compatibilization using epoxy in blends and the effect of epoxy on the properties of blends were reviewed, and the chemical reactions they undergo during melt blending were presented. An appropriate quantitative epoxy can improve the rheological, thermal and mechanical properties of blends. The future trend of epoxy compatibilizer was also suggested.
出处 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2010年第2期163-166,共4页 Polymer Materials Science & Engineering
基金 国家科技支撑计划项目(2007BAB08B05) 贵州省工业攻关项目(黔科合GY字(2008)(3005))
关键词 环氧树脂 共混物 相容性 epoxy resin blend compatibilizer
  • 相关文献

参考文献25

  • 1HUANG C C, CHANG F C. Reactive eompatibilization of polymer blends of poly ( butylene terephthalate) (PBT) and polyamide-6, 6 (PA66): 1. rheologieal and thennat properties[J]. Polymer, 1997, 38: 2135-2141.
  • 2HUANG C C, CHANG F C. Reactive compatibilization of polymer blends of poly (butylene terephthalate ) and polyamide 6, 6: 2. morphological and mechanical properties [ J ].. Polymer, 1997, 38: 4287-4293.
  • 3CHIOU K C, CHANG F C. Reactive compatibilization of polyamide-6 ( PA6 )/polybutylene terephthalate (PBT) blends by a multifunctional epoxy resin[J]. Polymer Science, 2000, 38: 23-33.
  • 4CHEN G X, KIM H S, KIM E S, et al. Compatibilization like effect of reactive organoclay on the poly (L-lactide)/poly (butylene succinate) blends[J]. Polymer, 2005, 46:11829-11836.
  • 5XANTHOS M, DAGLI S S. Reactive compatibiliza of PA-6/ABS blends using styrene-malaic anhydride copolymers[J ]. Polym. Eng. Sci., 1991; 31(3): 929-935.
  • 6TJONG S C, MENG Y Z. Effect of reactive eompatibilizers on the mechanical properties of polycarbonate/poly (acrylonitrile-butadiene- styrene)blends[J]. Eur. Polym. J., 2000, 36: 123-129.
  • 7LO D W, CHIANG C R, CHANG F C. Reactive compatibilization of PET and PPE blends by epoxy couplers [ J ]. J. Polym. Sci., 1997, 65: 739-753.
  • 8XUE M L, YU Y L, CHUAH H H, et al. Miscibility and crystallization of poly ( trimethylene terephthalate ) / acrylonitrile- butadiene-styrene blends[J]. Polymer, 2007, 43: 3826-3837.
  • 9JUN A N, JINYINC C E,YOUX1 L. Special effect of epoxy resin E44 on compatibility of poly (butylene and mechanical properties terephthalate)/polyamide-6 blends[J]. J. Polym. Sci., 1996, 60: 1803-1810.
  • 10CHIN H C, CHANG F C. Reactive compatibilization of PET/LCP blends by a multifuncticmal epoxy coupler[J ]. Polymer , 1997, 38: 2947-2956.

同被引文献35

  • 1Balakrishnan S, Neelakantan N R, Jaisankar S N. Effect of Functionality Levels and Compatibility of Polycarbonate Blends with Maleic Anhydride Grafted ABS[J]. Journal of Applied Polymer Seienee, 1999,74 .. 2102-2110.
  • 2Yang Kumin, Lee Shiho, Oh J ongman. Effects of Viscosity Ratio and Compatibilizers on the Morphology and Mechani- cal Properties of polycarbonate/Acrylonitrile-butadiene- styrene Blends [J]. Polymer Engineering and Science, 1999,39(9) .. 1667-1677.
  • 3Wildesa G S, Harada T, Keskkula H, et al. Synthesis and Characterization of an Amine-functional SAN for the Compatibilization of PC/ABS Blends[J]. Polymer, 1999, 40 .. 3069-3082.
  • 4Huang Chiehchih, Chang Fengchih. Reactive Compatibiliza- tion of Polymer Blends of Poly (butylene- terephthalate) (PBT) and Polyamide-6,6 ( PA66 ) .. 1. Rheological and Ther- mal Properties[J]. Polymer, 1997,38(9) .-2135-2141.
  • 5Tjong S C, Meng Y Z. Mechanical Properties and Mor- phologies of Epoxy Compatibilized PC/PA6 Composites [J]. Materials Research Bulletin, 2004,39.- 1791-1801.
  • 6Tjong S C, Meng Y Z. Effect of Reactive Compatibilizers on the Mechanical Properties of Polycarbonate/Poly(ac- rylonitrile-butadiene-styrene) Blends[J]. European Poly- mer Journal, 2000,36 .- 123-129.
  • 7SUN H W, LUO Z, YU J, et al. Study on modifying the compression set of plasticized poly ( vinyl chloride) by epoxy resin and post-heat treatment [J]. J Polym Res, 2012, 19 (8) : 9922-9928.
  • 8BROOKMAN R S, MAZER P, SCHMEYER D. Compounds based on ultra-high molecular weight PVC resin for use in automo- tive application [J]. Vinyl Technol, 1993, 15 (1): 9-14.
  • 9LI L J, HE B B, CHEN X. Epoxylsilance crosslinking of rigid poly (vinyl chloride) [ J]. J Appl Polym Sci, 2007, 106 (6): 3610-3616.
  • 10BOUCHAREB B, BENANIBA M T. Effects of epoxidized sunflower oil on the mechanical and dynamical analysis of the plasticized poly (vinyl chloride) [JT. J Appl Polym Sci, 2007, 107 (6): 3442-3450.

引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部