期刊文献+

CFD modeling of pressure drop and drag coefficient in fixed beds:Wall effects 被引量:6

CFD modeling of pressure drop and drag coefficient in fixed beds:Wall effects
原文传递
导出
摘要 Simulations of fixed beds having column to particle diameter ratio (D/dp) of 3, 5 and 10 were performed in the creeping, transition and turbulent flow regimes, where Reynolds number (dpVLρL/μL) was varied from 0.1 to 10,000. The deviations from Ergun's equation due to the wall effects, which are important in D/dp 〈 15 beds were well explained by the CFD simulations. Thus, an increase in the pressure drop was observed due to the wall friction in the creeping flow, whereas, in turbulent regime a decrease in the pressure drop was observed due to the channeling near the wall. It was observed that, with an increase in the D/dp ratio, the effect of wall on drag coefficient decreases and drag coefficient nearly approaches to Ergun's equation. The predicted drag coefficient values were in agreement with the experimental results reported in the literature, in creeping flow regime, whereas in turbulent flow the difference was within 10-15%. Simulations of fixed beds having column to particle diameter ratio (D/dp) of 3, 5 and 10 were performed in the creeping, transition and turbulent flow regimes, where Reynolds number (dpVLρL/μL) was varied from 0.1 to 10,000. The deviations from Ergun's equation due to the wall effects, which are important in D/dp 〈 15 beds were well explained by the CFD simulations. Thus, an increase in the pressure drop was observed due to the wall friction in the creeping flow, whereas, in turbulent regime a decrease in the pressure drop was observed due to the channeling near the wall. It was observed that, with an increase in the D/dp ratio, the effect of wall on drag coefficient decreases and drag coefficient nearly approaches to Ergun's equation. The predicted drag coefficient values were in agreement with the experimental results reported in the literature, in creeping flow regime, whereas in turbulent flow the difference was within 10-15%.
出处 《Particuology》 SCIE EI CAS CSCD 2010年第1期37-43,共7页 颗粒学报(英文版)
基金 One of us (Rupesh Kumar Reddy Guntaka) acknowledges the fellowship support given by the university Grant Commission (UGC),Government of India
关键词 Computational fluid dynamics Fixed bed Wall effects Pressure drop Drag coefficient Computational fluid dynamics Fixed bed Wall effects Pressure drop Drag coefficient
  • 相关文献

参考文献20

  • 1Calis, H. P. A., Nijenhuis, J., Paikert, B. C., Dautzenberg, F. M., & van den Bleek, C M. (2001). CFD modeling and experimental validation of pressure drop and flow profile in a novel structured catalytic reactor packing. Chemical Engineering Science, 56, 1713-1720.
  • 2Carman, P. C. (1937 ). Fluid flow through granular beds. Transactions of the Institution of Chemical Engineers, 15. 150-166.
  • 3Chu, C, F., & Ng, K. M. (1989). Flow in packed bed tubes with small tube to particle diameter ratio. AIChEJoumal, 35, 148-158.
  • 4Coulson, J. M. (1949). The flow of fluids through granular beds: Effect of particle shape and voids in streamline flow. Transactions of the Institution of Chemical Engineers, 27, 237-257.
  • 5Dalman, M. T., Merkin, J. H., & McGreav,J, C. (1986). Fluid flow and heat transfer past two spheres in a cylindrical tube. Computers & Fluids, 14, 267-281.
  • 6Di Felice, R., & Gibilaro, L G. (2004). Wall effects for the pressure drop in fixed beds. Chemical Engineering Science, 59, 3037-3040.
  • 7Eisfeld, B., & Schnitzlein, K. (2001). The influence of confining walls on the pressure drop in packed beds. Chemical Engineering Science, 56, 4321-4329.
  • 8Ergun, S. (1952). Fluid flow through packed columns. Chemical Engineering Progress, 48. 89-94.
  • 9Foumeny, E. A., Benyahia, F., Castro, J. A. A., Moallemi, H. A., & Roshani. S. 0993). Correlations of pressure drop in packed beds taking into account the effect of confining wall. International Journal of Heat and Mass Transfer, 36, 536-540.
  • 10Guardo, A., Coussirat, M., Larrayoz, M. A., Recasens, F., & Egusquiza, E. (2005). Influence of the turbulence model in CFD modeling of wall-to-fluid heat transfer in packed beds, Chemical Engineering Science,60, 1733-1742.

同被引文献38

引证文献6

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部