摘要
本文以６１８０柴油机整个曲轴作为有限元计算模型，将曲轴离散为三维２１节点和１６节点单元及边界元，通过适当选取受力条件与约束条件，在大型机上完成了曲轴的有限元强度计算．本文还采用电测法对该曲轴应力状态进行了测量．计算结果与实验结果吻合较好．
The entire crankshaft of 6180 diesel engine is considered as a calculation model and meshed into three dimensional finite elements of 21 nodes and 16 nodes,and boundary elements.The crankshaft strength is calculated on a large computer by applying suitable force and boundary conditions.The stress of the crankshaft is also measured by electricmeasurement.The calculation results and the experiment results show good agreement.
出处
《天津大学学报》
EI
CAS
CSCD
1998年第6期762-766,共5页
Journal of Tianjin University(Science and Technology)
关键词
曲轴
有限元
应力状态
柴油机
测量
crankshaft, finite element analysis, stress state, electric measurement
