期刊文献+

Tri-directional shaking table tests of vibration sensitive equipment with static dynamics interchangeable-ball pendulum system 被引量:1

Tri-directional shaking table tests of vibration sensitive equipment with static dynamics interchangeable-ball pendulum system
下载PDF
导出
摘要 Recently, the high-tech industry has become a key industry for economic development in many countries. However, vibration sensitive equipment located in these industrial buildings is vulnerable during earthquakes, which may cause huge economic loss. In this study, an innovative isolator for safeguarding the vibration sensitive equipment, namely, the static dynamics interchangeable^all pendulum system (SDI-BPS) is proposed and investigated to examine its protective capability for the vibration sensitive equipment during earthquakes through a series of tri-directional shaking table tests. The experimental results illustrate that the SDI-BPS isolator can provide significant damping to rolling types of base isolation systems for reducing the bearing displacement and size, and avoid the stress concentration, which can cause damage or scratches on the rolling surface of the isolator, to prolong its life span of service. The SDI-BPS isolator also provides excellent capability in protecting the vibration sensitive equipment and exhibits a stable behavior under long terms of service loadings and earthquakes. Recently, the high-tech industry has become a key industry for economic development in many countries. However, vibration sensitive equipment located in these industrial buildings is vulnerable during earthquakes, which may cause huge economic loss. In this study, an innovative isolator for safeguarding the vibration sensitive equipment, namely, the static dynamics interchangeable^all pendulum system (SDI-BPS) is proposed and investigated to examine its protective capability for the vibration sensitive equipment during earthquakes through a series of tri-directional shaking table tests. The experimental results illustrate that the SDI-BPS isolator can provide significant damping to rolling types of base isolation systems for reducing the bearing displacement and size, and avoid the stress concentration, which can cause damage or scratches on the rolling surface of the isolator, to prolong its life span of service. The SDI-BPS isolator also provides excellent capability in protecting the vibration sensitive equipment and exhibits a stable behavior under long terms of service loadings and earthquakes.
出处 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2010年第1期103-112,共10页 地震工程与工程振动(英文刊)
基金 the Science Council in Taiwan for the financial support(Project No.NSC 95- 2221-E-035-1120)
关键词 ball pendulum system critical equipment base isolation vibration sensitive equipment base isolator passive control earthquake engineering structural control ball pendulum system critical equipment base isolation vibration sensitive equipment base isolator passive control earthquake engineering structural control
  • 相关文献

参考文献17

  • 1Alhan C and Gavin HP (2005),"Reliability of Base Isolation for the Protection of Critical Equipment from Earthquake Hazards," Engineering Structures,27:1435-1449.
  • 2Bakker JFJ (1935),"Balance Block for Buildings," US Patent No.2014643.
  • 3Chung LL,Yang CY,Chen HM and Lu LY (2008),"Dynamic Behavior of Nonlinear Rolling Isolation System," Structural Control and Health Monitoring,DOI:10.1002/stc.305.
  • 4Cummings FD(1930),"Buildin gConstruction (Quakeproof Building)," US Patent No.1761659.
  • 5Fan YC,Lob CS,Yang JN and Lin PY (2008),"Experimental Performance Evaluation of an Equipment Isolation Using MR Dampers," Earthquake Engineering and Structural Dynamics,DOI:10.1002/eqe.844.
  • 6Fenz DM and Constantinou MC (2006),"Behavior of the Double Concave Friction Pendulum Bearing,"Earthquake Engineering and Structural Dynamics,35(11):1403-1424.
  • 7Kemeny ZA (1997),"Ball-in-cone Seismic Isolation Bearing," US Patent No.5599106.
  • 8Schar F (1910),"Foundation for Buildings," US Patent No.951028.
  • 9Tsai CS,Chen WS,Chiang TC and Lin YC (2007),"Application of Direction Optimized-friction Pendulum System to Seismic Mitigation of Sensitive Equipment,"in Dermenjian A,The 2007 ASME Pressure Vessels and Piping Conference,Seismic Engineering,San Antonio,Texas,U.S.A.,Paper No.PVP2007-26552.
  • 10Tsai CS,Chen WS,Lin YC,Tsou CP,Chen CC and Lin CL (2008),"Shaking Table Tests of Motion Sensitive Equipment Isolated with Static Dynamics Interchangeable-Ball Pendulum System," The 14th World Conference on Earthquake Engineering,Beijing,China,Paper No.11-0010.

同被引文献7

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部