期刊文献+

聚乙烯醇助分散剂对悬浮聚氯乙烯树脂颗粒特性的影响 被引量:8

Influences of secondary dispersant of PVA on particle feature of polyvinyl chloride by suspesion polymerization
下载PDF
导出
摘要 在聚乙烯醇(PVA)/羟丙基甲基纤维素复合主分散体系基础上加入牌号为LM22的PVA助分散剂,研究LM22含量对分散体系界面张力、保胶能力和聚氯乙烯(PVC)树脂颗粒形态的影响。发现随着LM22含量增加,分散剂水溶液-三氯乙烯界面张力和保胶能力降低,PVC树脂平均粒径和增塑剂吸收量增加;随着LM22用量增加,颗粒内部孔隙率增加,初级粒子聚集程度降低,颗粒内部孔径分布变窄。 The LM22 PVA as the secondary dispersant was added based on PVA/hydroxypropyl methyl cellulose composite as the main dispersants. The influence of content of LM22 on the interfacial tension, colloid-protection ability and particle shape were investigated. Aqueous solution of dispersants, interfacial tension of trichloroethylene, and colloid-protecion ability of dispersants were decreased with increase content of LM22, as well as the average diameter of particle and absorption content of plasticizer were increased. Internal porosity of particle was increased with the LM22 mass fraction increased, and the aggregation degree of primary particles was decreased. The distribution of internal pore size was narrowed.
出处 《中国氯碱》 CAS 2010年第2期8-11,共4页 China Chlor-Alkali
基金 国家科技支撑计划项目课题资助(编号:2007BAE10B01)
关键词 聚氯乙烯 悬浮聚合 聚乙烯醇 颗粒形态 孔隙 PVC suspension polymerization PVA particle shape porosity
  • 相关文献

参考文献7

  • 1WilkesCE,SummersJW,DanielsCA编著.聚氯乙烯手册,乔辉,丁筠.盛平厚等译.北京:化学工业出版社.2008.
  • 2Faraday A G, Courtis A. Effect of grain morphology on the diffusion of residual vinyl chloride from suspension PVC, Plastic. Rubber & Composite Processing Appl., 1992, (18) : 91-94.
  • 3Quy R B. The effect of the interior particle structure of PVC suspension resin on the behavior of plasticizer absorption, J. Macromol. Sci. : Phys., 1981, B20(2) : 235-256.
  • 4Ormondroyd S. The influence of poly (vinyl alcohol) suspending agents on suspension poly(vinyl chloride ) morphology. British Polymer J, 1988, (20) : 353-359.
  • 5Bao Y Z, Liao J G, Huang Z M, Weng Z X. Influences of individual and composed poly (vinyl alcohol)suspending agents on particle morphology of suspension poly (vinyl chloride) resin. J. Appl. Polym. Sci., 2003, (90) : 3848-3855.
  • 6Hong S, Albu R, Labbe C, Lasuye T, Stasik B. Riess G. Preparation and characterization of colloidal dispersion of vinyl alcohol-vinyl acetate copolymers: application as stabilizers for vinyl chloride suspension polymerization. Polymer International, 2006, 55(12): 1426-1434.
  • 7Nilsson H, Silvergren C, Tornell B, Lundqvist J. Petersson S. Suspension stabilizers for PVC production. III. Control of resin porosity. L Vinyl Techn., 1985, 7(3) : 123-127.

同被引文献13

引证文献8

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部