期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

Ti对DZ68合金凝固偏析的影响 被引量：1

Effect of Titanium on Solidification and Segregation of DZ68 Alloy
下载PDF
导出
摘要 利用光学显微镜(OM)、电子探针(EPMA)等手段研究了不同Ti含量的DZ68合金的凝固过程和主元素的偏析.结果表明:本实验条件下,随合金中Ti含量的增加,合金的初凝温度和终凝温度逐渐降低,但初凝和终凝的温度区间逐渐增大;Ti含量的增加,促进Ta的正偏析程度,同时也使W的负偏析程度显著增加.为了减少DZ68合金组织中析出的(γ+γ′)共晶,Ti的质量分数应控制在1.7%以下. Abstract： Solidification and segregation of the major elements in DZ68 alloy with different Ti contents were studied by optical microscopy （Oh/I） and electronic probe micro analysis （EPMA）. The results showed that both the temperature of initial solidification and temperature of final solidification decrease gradually but the temperature range of solidification increases gradually with increasing Ti content in alloy under the test conditions. However, the increasing Ti content enhances both the positive segregation of Ta and negative segregation of W obviously. To reduce the （γ＋γ′） eutectic in DZ68 alloy, the mass fraction of Ti in alloy should not be more than 1.7%.
作者 管秀荣 郑志 刘恩泽 翟玉春
机构地区 东北大学材料与冶金学院 中国科学院金属研究所
出处 《东北大学学报（自然科学版）》 EI CAS CSCD 北大核心 2010年第2期214-216,220,共4页 Journal of Northeastern University(Natural Science)
基金 国家自然科学基金资助项目(50901077)
关键词 TI 高温合金 凝固 偏析 (γ+γ′)共晶 titanium superalloy solidification segregation （γ＋γ′） eutectic
分类号 TG146.1 [金属学及工艺—金属材料]
  • 相关文献

参考文献9

  • 1Yin F S, Sun X F, Li J G, et al. Effects of melt treatment on the cast structure of M963 superalloy [ J ]. Scripta Materialia, 2003,48 (4) : 425 - 429.
  • 2Wright I G, Gibbons T B. Recent developments in gas turbine materials and technology and their implications for syngas firing[J]. International Journal of Hydrogen Energy, 2007, 32(16) :3610 - 3621.
  • 3Yokokawa T, Osawa M, Nishida K, et al. Partitioning behavior of platinum group metals on the y and y' phases of Ni-base superalloys at high temperatures [J].Scripta Materialia, 2003,49(10) : 1041 - 1046.
  • 4Zhang Y, Pint B A, Haynes J A, et al. A platinum-enriched y + y' two-phase bond coat on Ni-hased superalloys [J].Surface & Coatings Technology, 2005, 200 ( 5 ) : 1259 - 1263.
  • 5Djanarthany S, Viala J C, Bouix J, et al. An overview of monolithic titanium aluminides based on Ti3A1 and TiA[ [ J ]. Materials Chemistry and Physics, 2001,72(3) :301 - 319.
  • 6Schuster J C. Critical data evaluation of the alumlnium-niekeltitanium system[J ]. Intermetallics, 2006, 14 ( 10/11 ) : 1304 - 1311.
  • 7Souza N D, Lekstrom M, Dong H B. An analysis of measurement of solute segregation in Ni-base superaUoys using X-ray pectroscopy [J].Materials Science and Engineering: A, 2008,490(1/2).258 265.
  • 8崔彤,刘爽,王磊,杨洪才.一种新型镍基合金相的析出规律[J].东北大学学报（自然科学版）,2005,26(6):558-561. 被引量：5
  • 9Semiatin S L, Kramb R C, Turner R E, et al. Analysis of the homogenization of a nickel-base superalloy [ J ]. Scripta Materialia, 2004,51(6) :491-495.

二级参考文献10

  • 1吕俊英,杨洪才,王志兴,盖迎新,霍桂英.一种高温合金的γ'相析出初期长大动力学[J].东北大学学报（自然科学版）,1994,15(2):184-188. 被引量：9
  • 2Sims C T, Hagel W C. The Superalloys[M].New York: John Wiley & Sons, 1972.49－53.
  • 3Sauthoff G, Speller W. Kinetics of σ phase precipitation in FeCrSi alloys[J].ZMetallkde,1981,72(7):458－468.
  • 4Kong Y H, Chen Q Z. Effect of minor additions on the formation of TCP phases inmodified RR2086 SX superalloy[J].Materials Science and Engineering,2004,A366(1):135－143.
  • 5Sims C T, Stoloff S, Magel C.SuperalloysⅡ[M]. New York: John Wiley, 1987.259－284.
  • 6Jena A K, Chaturvedi M C. Role of alloying elements in the design of nickelbasesuperalloys[J]. Journal of Materials Science, 1984,19(10):3121－3139.
  • 7Mcgurran B, Marting J W. The control of distribution by duplex dispersions of γ′phasein a nickel based superalloy[J].Zeitschrift Fur Metallkunde, 1981,72(8):538－546.
  • 8Singh P N, Singh V. Influence of ageing treatment on work hardening behaviour of aNi-base superalloy[J]. Scripta Materialia, 1996,34(12):1861-1865.
  • 9Sha W. Quantification of age hardening in maraging steels and an Nibasesuperalloy[J]. Scripta Mater, 2000,42(1):549－553.
  • 10Hasen P. Physical metallurgy[M]. London: Cambridge University Press, 1978.204-208.

共引文献4

同被引文献15

  • 1陈增涛,王铎.高应变率下金属塑性损伤的形核机理[J].材料科学与工程,1995,13(1):51-55. 被引量：6
  • 2宋美娟,王智祥,汪凌云,向毅.镁合金的超塑性与损伤定量分析[J].稀有金属,2006,30(3):300-304. 被引量：4
  • 3田玉亮,王玲,董建新,张麦仓,曾燕屏.均匀化处理过程中Waspaloy合金铸锭中元素分配规律的研究[J].稀有金属材料与工程,2006,35(9):1412-1417. 被引量：14
  • 4黄乾尧,李汉康等.高温合金.北京:冶金工业出版社,2004:322-324.
  • 5《中国航空材料手册》编委会.中国航空材料手册(第二卷).北京:中国标准出版社,2002.
  • 6Tasan C C, Hoefnagels J P M, Ten Horn C H L J, et al. Experi- mental analysis of strain path dependent ductile damage mechanics and forming limits. Mech Mater, 2009, 41 : 1264.
  • 70chsner A, Gegner J, Winter W, et al. Experimental and numeri- cal investigations of ductile damage in aluminium alloys. Mater Sci Eng A, 2001, 318(1): 328.
  • 8Sommitsch C, Pith P, Rtif G, et al. On the modelling of the inter- action of materials softening and ductile damage during hot working of Alloy 80A. J Mater Process Technol, 2006, 177:282.
  • 9Besson J. Damage of ductile materials deforming under multiple plastic or viscoplastic mechanisms. Int J Pla~t, 2009, 25 ( 11 ) : 2204.
  • 10王淑云,东资鹏,李慧曲,等.热处理对等温锻造GH710合金显微组织的影响//探索,交流,创新(第三集)--第三届中国航空学会青年科技论坛文集.贵阳,2008:498.

引证文献1

二级引证文献3

东北大学学报（自然科学版）
2010年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部