摘要
In order to investigate the formability of metal material in semisolid state, a series of experiments were carried out by thixo-forging the complex part of aluminum alloy AlSi7Mg. Through changing the upper punch, aluminum parts with different upper-cup dimensions can be successfully produced. The numerical simulation was conducted for investigating the forming limits of AlSi7Mg during thixo-forging. It is found that the simulation result is in good agreement with the experiment one.
In order to investigate the formability of metal material in semisolid state, a series of experiments were carried out by thixo-forging the complex part of aluminum alloy AlSi7Mg. Through changing the upper punch, aluminum parts with different upper-cup dimensions can be successfully produced. The numerical simulation was conducted for investigating the forming limits of AlSi7Mg during thixo-forging. It is found that the simulation result is in good agreement with the experiment one.
基金
supported by the National High-Tech Research and Development Program of China(No.2007AA03Z119)
the National Natural Science Foundation of Beijing (No.2072012 and No.2102029 )