摘要
借助XRD、SEM等研究了0％-0．6％的Mn对00Cr20Ni18Mo6V0．8Si0．1耐海水腐蚀不锈试验钢力学性能的影响。结果表明：当Mn为0．2％时，抗拉强度（σb）最大为583MPa；延伸率（δ）最大为23．3％，硬度随Mn含量的增高也略微上升，但变化不是很明显。
The effect of 0% -0.6% Mn on mechanical properties of 00Cr20Ni18Mo6V 0.8Si 0.1 seawater corrosion resistence stainless steel has been studied by XRD,SEM. The test results show when Mn content is 0.2% ,its tensile （σb） is 583MPa; elongation（δ） is 23.3% ,the hardness increase slightly with the Mn content ,but the change is not obvious.
出处
《机械研究与应用》
2010年第1期67-69,共3页
Mechanical Research & Application
关键词
耐海水腐蚀不锈钢
组织
力学性能
seawater corrosion resistence stainless steel
microstmcture
mechanical property
