摘要
目的对某电子公司彩电生产基地建设项目职业病危害因素及防护措施效果进行评价。方法依据《使用有毒物质作业场所劳动保护条例》及相关的法律法规,采用现场调查、检查表法、工程分析、采样检测等方法,评价其职业病危害程度和防护措施的效果。结果该建设项目的选址、总平面布局、职业病防护设施设计、卫生辅助用室设置等符合国家有关规定;生产过程中可能产生的主要职业病危害因素有苯、甲苯、二甲苯、丙酮、锡及其化合物、苯乙烯、一氧化碳、聚苯乙烯粉尘、电焊烟尘、其他粉尘、噪声、高温。经现场测试,粉尘和有毒物质合格率均为100.0%,噪声合格率为90.9%,高温合格率为57.1%。结论该项目采取的职业病危害防护措施和生产管理措施是可行的。
Objective To assess the hazardous degree of occupational risk factors and protective measure in the color television production project of electronic company,and propose the reasonable feasible countermeasure for occupational diseases.Methods Occupational risk factors in the process were detected by the ways of field investigation and analysis.Based on the national related laws and regulations,harmful degree of occupational diseases and the protective effect were evaluated.Results This items including selection of site overall layout,design of occupational protective measures,facilities of auxiliary rooms accorded with national standards.In the production process,the main occupational hazardous factors were toxic substances(benzene,toluene,xylene,acetone,tin and compound,styrene and carbon monoxide),dust(polystyrene dust,electric welding mist and other dusts) and physical factors(noise, high temperature).Qualified rates of dust and toxic substances were 100.0%, qualified rate of noise was 90.9%,qualified rate of high temperature was 57.1%.Conclusion It is feasible for the project to adopt occupational protection and production management measures.
出处
《中国卫生工程学》
CAS
2010年第1期23-25,共3页
Chinese Journal of Public Health Engineering
关键词
彩电生产
职业病危害
控制效果评价
Color television production
Occupational hazard
Control effect evaluation