期刊文献+

超宽带折合环天线的设计与研究 被引量:4

Design and study of ultra-wideband folded loop antennas
下载PDF
导出
摘要 提出了一种新型超宽带折合环形天线的设计。该天线采用共面波导馈电,易于与其他微波电路集成在一起;通过引入五边形的折合环结构,该天线的工作带宽较常规的折合环天线提高了一倍以上;通过数值计算研究了某些尺寸参数对天线输入特性的影响,在计算的基础上通过大量的实验详细研究了天线的频域工作特性。计算与实验的结果表明,该天线具有超过4.75:1的工作带宽和全向辐射特性,因此是一种有实用意义的超宽带天线。 Design of a novel ultra-wideband folded loop antenna was proposed.It was fed by coplanar waveguide and can be easily integrated with other microwave circuits.By introducing a pentagonal folded loop,the bandwidth of the an-tenna is improved twice than that of conventional folded loop antenna.Parametric study is carried out numerically by us-ing EM simulators.Based on numerical results,the antenna is also studied experimentally.As can be seen,an operation bandwidth of over 4.75:1 is obtained.The presented antenna may be practical for ultra-wideband applications.
出处 《通信学报》 EI CSCD 北大核心 2010年第2期76-80,共5页 Journal on Communications
基金 教育部博士学科点专项科研基金资助项目(20050293003) 国家重点基础研究发展计划("973"计划)基金资助项目(2007CB310607) 南京邮电大学引进人才科研基金资助项目(NY207019)~~
关键词 平面天线 印制天线 折合环天线 超宽带 planar antennas printed antenna folded loop antenna ultra-wideband
  • 相关文献

参考文献15

  • 1SCHANTZ H G. The Art and Science of Ultra-Wideband Antennas[M]. Artech House INC, Boston, MA: USA, 2005.
  • 2CHEN Z N. A new bi-arm roll antenna for UWB applications[J]. IEEE Trans on Antennas and Propagation, 2005, 53(2): 672-677.
  • 3LAU K L, LI P, LUK K M. A monopolar patch antenna with very wide impedance bandwidth[J]. IEEE Trans on Antennas and Propagation, 2005, 53(2): 655-661.
  • 4LIANG J, CHIAU C C, CHEN X, et al. Study of a printed circular disc monopole antenna for UWB systems[J]. IEEE Trans on Antennas and Propagation, 2005, 53(11): 3500-3504.
  • 5JANG Y W. Broadband cross-shaped microstrip-fed slot antenna [J]. Electronics Letters, 2000, 36(25): 2056-2057.
  • 6CHEN H D. Broadband CPW-fed square slot antenna with a widened tuning stub[J]. IEEE Trans on Antennas and Propagation, 2003, 51(8): 1982-1986.
  • 7BEHDAD N, SARABANDI K. A multiresonant single-element wide slot antenna[J]. IEEE Antenna and Wireless Propagation Letters, 2004, 3: 5-8.
  • 8LIN Y C, HUANG K J. Compact ultra-wideband rectangular aperture antenna and band-notched designs[J], IEEE Trans on Antennas and Propagation, 2006, 54(11): 3075-3081.
  • 9程勇,吕文俊,程崇虎,曹伟.一种小型平面超宽带天线的设计与研究[J].电波科学学报,2006,21(4):582-585. 被引量:27
  • 10LUI W J, CHENG C H, ZHU H B. Experimental investigation on novel tapered micro strip slot antenna for ultra-wideband applications[J]. IET Microwaves, Antennas & Propagation, 2007, 1(2): 480-487.

二级参考文献33

  • 1CHEN Z N. Broadband planar monopole antenna[J]. IEE Proc Microwave Antenna Propagation, 2000, 147(6): 526-528.
  • 2CHEN Z N, CHIA Y W M. Broadband monopole antenna with parasitic planar element[J]. Microwave and Optical Technology Letters, 2000, 27(3): 209-210.
  • 3CHUNG K. Wideband CPW-fed monopole antenna with parasitic elements and slots[J]. Electronics Letters, 2004, 40(17): 1038-1040.
  • 4JANG Y W. Broadband cross-shaped microstrip-fed slot antenna[J].Electronics Letters, 2000, 36 (25): 2056-2057.
  • 5SZE J Y, WONG K L. Bandwidth enhancement of a microstrip-line-fed printed wide-slot antenna[J]. IEEE Trans Antenna and Propagation, 2001, 49 (7): 1020-1024
  • 6CHEN Horng-Dean. Broadband CPW-fed square slot antenna with a widened tuning stub[J]. IEEE Trans Antenna and Propagation, 2003,51 (8): 1982-1986.
  • 7BEHDAD N, SARABARDI K. A multiresonant single-element wide slot antenna[J]. IEEE Antenna and Wireless Propagat Letters, 2004,3(1): 5-8.
  • 8LEE H L, LEE H J, YOOK J W, et al. Broadband planar antennahaving round corner rectangular wide slot[A]. IEEE Antennas and Propagation Society International Symposium, San Antonio[C]. Texas,USA, 2002. 460-463.
  • 9J D Taylor(Ed. ). Introduction to Ultra-Wideband Radar Systems[M]. CRC Press. Boca Raton, Ann Arbor, London, Tokyo,1995.
  • 10H F Harmuth. Nonsinusoidal Waves for Radar and Radio Communication [ M ]. New York: Academic,1981.

共引文献44

同被引文献16

引证文献4

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部