期刊文献+

磷酸酸洗对AlN粉末抗水解性能的影响 被引量:4

EFFECT OF PHOSPHORIC ACID PICKLING ON THE ANTI-HYDROLYTIC OF AlN POWDERS
下载PDF
导出
摘要 通过测定磷酸酸洗后的亚微米和纳米AlN粉末在水解时pH值随时间的变化,研究了磷酸酸洗和粉末粒度对氮化铝粉末抗水解性能的影响。结果表明,磷酸酸洗能有效提高AlN粉末的抗水解性能,并且酸酸洗效果随粒度的减小而加强。利用XRD和DSC-TGA分析了磷酸酸洗提高AlN粉末的抗水解性能的机制。结果表明,磷酸酸洗无新相生成,酸洗对氮化铝粉末的保护只发生在粉末的表面,并且使表面钝化。 The influences of powder size and phosphoric acid pickling on the anti-hydrolytic property of AIN powders were studied by measuring the pH value via hydrolysis time. It is shown that the hydrolysis of AIN powder is restrained and the improvement of the anti-hydrolytic property of AIN powders increases with the decrease of powder size. The effecting mechanism of phosphoric acid pickling on the anti-hydrolytic property of AIN powders was studied by XRD and DSC-TGA. It is shown that no new phase is generated by phosphoric acid pickling and the protection of the AIN powders by phosphoric acid pickling only occurred on the surface, and made the surface passivation.
出处 《中国陶瓷》 CAS CSCD 北大核心 2010年第4期51-55,共5页 China Ceramics
基金 国家自然科学基金资助项目,编号:50801037 教育部长江学者和创新团队发展计划资助项目,编号:IRT0730
关键词 氮化铝 磷酸 酸洗 抗水解性能 Aluminum Nitride, Phosphoric acid, Pickling, Anti-hydrolytic property
  • 相关文献

参考文献14

  • 1Sheppard L M. Aluminum nitride: a versatile but challenge material [J]. Am Ceram Soc Bull, 1990, 69(11): 1801-1812.
  • 2Mildsb,Volf. Chemical approach to glass. New York--Tokyo. 1984:562-569.
  • 3Werdecker W,Aldinger F.Aluminum nitride-an alaternative ceramic substrates for high power applications in microcircuits .IEEE, Transactions on Component, Hybrids,and Manufaturing Technology, 1984,7(4): 399-404.
  • 4Kuramoto N,Taniguchi H, Aso I.Development of translucent aluminum nitride ceramics [J].Am Ceram Soc Bull, 1989 , 68(4): 883-887.
  • 5Tummaia R R. Ceramics in microelectronic packaging[J]. Am Ceram Soc Bull,1988,67(4):752.
  • 6徐征宙,曲选辉,段柏华.利用硅烷改善氮化铝粉末抗水解性的研究[J].电子元件与材料,2004,23(12):7-9. 被引量:14
  • 7Bowen p,Highfield J G,Mocellin A, et al. Degradation of aluminum nitride powders in an aqueous environment [J]. Journal of the American Ceramic Society, 1990,73(3):724-728.
  • 8Egashira E,Shimizu Y,Takatsuki S. Chemical surface treatment of aluminum nitride powder suppressing its reactivity with water [J]. J Mater Letter,1991,45(10):994-996.
  • 9张宗涛,胡黎明.注浆成型AlN粉末的抗水解表面处理[J].电子元件与材料,1996,15(5):49-52. 被引量:9
  • 10Kristoffer Krnel,Tomaz Kosmac. Protection of AlN powder against hydrolysis using aluminum dihydrogen phosphate [J]. Journal of the European Ceramic Society 2001,21:2075 2079.

二级参考文献5

  • 1Sheppard L M. Aluminum nitride: a versatile but challenge material [J]. Am Ceram Soc Bull, 1990, 69(11): 1801-1812.
  • 2HUANG Yong, MA Liguo, YANG Jinlong, et al. A new approach to preparing high-performance ceramic parts with complex shape: aqueous collidal injectiuon molding [J]. Key Eng Mater, 2003, 247: 39-44.
  • 3Bowen P, Highfield J G, Mocellin A, et al. Degradation of aluminum nitride powders in an aqueous environment [J]. J Am Ceram Soc, 1990, 73(3): 724-728.
  • 4Egashira E, Shimizu Y, Takatsuki S. Chemical surface treatment of aluminum nitride powder suppressing its reactivity with water [J]. J Mater Letter, 1991, 45(10): 994-996.
  • 5Arkles B. Tailoring surfaces with silanes [J]. Chem Tech, 1977, (7): 776.

共引文献28

同被引文献40

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部