摘要
本文提出一种新型馈电结构的印刷角锥四臂螺旋天线。通过采用柱面共形结构馈电网络,与传统四臂螺旋天线相比极大地减小了地板安装面积及改善了阻抗带宽和轴比带宽。S11小于-10dB的阻抗带宽可达39.7%,3dB轴比带宽约22%。测试与仿真结果吻合良好。
A novel broadband cone printed quadrifilar helical antenna with a new type feeding network is presented in this paper. The installed place is much reduced by using conformal feeding network and the impedance band- width and axial-ratio bandwidth are great improved compared with conventional quadrifilar helical antenna. The antenna can achieve an impedance bandwidth of 39.7 % for SH 〈 - 10 dB and a 3 dB axial-ratio bandwidth of about 22 %. The simulated results and measured results are presented and they are in good agreement.
出处
《电子器件》
CAS
2010年第1期76-80,共5页
Chinese Journal of Electron Devices
关键词
印刷四臂螺旋天线
共形馈电网络
全球定位系统天线
宽带圆极化天线
printed quadrifilar helical antenna
conformal feeding network
GPS antenna
broadband circularly polarized antenna