摘要
通过溶胶-凝胶法,以正硅酸乙酯(TEOS)为原料,通过γ-缩水甘油醚氧丙基三甲氧基硅烷(KH560)制备环氧基改性硅溶胶。将改性后的硅溶胶应用到丙烯酸铁红漆中。用红外光谱、热质分析、接触角及电化学测试对制备的涂层进行性能测试。实验结果发现:加入0.5%的环氧改性硅溶胶的丙烯酸铁红漆与未改性的相比,其热稳定性、疏水性及耐腐蚀性有很大的提高。
An epoxy modified colloidal silica was prepared by using tetraethylorthosilicate and 3 - glyeid- oxyproyltrimethoxysilane(KH560) as precursors at the presence of acid catalyst through sol - gel process. The modified colloidal silica was used to formulate waterbased acrylic red iron paint. Its properties were characterized by FTIR, TGA, contact angle and EIS measurement. The results showed that 0. 5% epoxy of modified collidal silica can provide better thermal stability, hydrophobicity and corrosion protection of acryli- crediron paint compared to unmodified one.
出处
《涂料工业》
CAS
CSCD
北大核心
2010年第4期47-50,55,共5页
Paint & Coatings Industry
基金
2009年江苏省高等学校大学生实践创新训练计划
校人才基金资助项目(35060704)
关键词
溶胶-凝胶法
硅烷偶联剂
丙烯酸铁红漆
耐腐蚀
sol- gel process
silane coupling agent
acrylic red iron paint
anticorrosion