摘要
采用Moldflow软件对汽车外饰件的熔接痕进行分析,并基于该软件的二次开发原理对熔接痕结果进行量化输出,以量化后的结果作为评价指标,结合正交设计获得了1组最优工艺参数及各工艺参数对熔接痕的影响规律;最后,应用Moldflow软件对最优工艺参数进行验证。
In this paper, the weld line on automobile decoration parts was analyzed and simulated using Moldflow software. The best processing parameters and its effect on the weld line were obtained via orthogonal design methods. Finally, the optimal processing parameters were verified by Moldflow software. The results showed that this method can optimize the properties of weld lines.
出处
《中国塑料》
CAS
CSCD
北大核心
2010年第4期58-60,共3页
China Plastics
基金
贵州省优秀青年科技人才培养对象专项[黔科合人字(2009)12号]
关键词
数值模拟
汽车外饰件
熔接痕
numerical simulation
automobile decoration part
weld line
