期刊文献+

柔性链聚合物及其共混物熔体粘度与温度关系的两种表征方法的研究 被引量:2

The Study on the two Kinds of Characterization of Relation Between η_a and T of the Melts of Flexible Polymers and Their Blends
下载PDF
导出
摘要 用高压毛细管流变仪研究了HDPE、EVA、ABS、PP/TMB、HDPE/EPDM柔性链聚合物及其共混物熔体较宽.γ范围内ηa与T的关系,并对表征ηa与T关系的两种方法的差异进行了分析,结果表明,方程ηa=A+KηT能简便、直观、真实的表征ηa与T的关系,方程lnηa=lnA+△Eη/RT不仅不能直观地表征ηa与T的关系,而且"压缩"了.γ、T的变化引起ηa变化的程度,使.γ、T与ηa的关系失去了真实性。 The relation between apparent viscosity(η_a) and T of the melts of some flexible polymers and polymer blends,which are respectively HDPE,EVA,ABS,PP/TMB,HDPE/EPDM,was characterized using a capillary rheometer,and the difference in two characterization approaches about the relation between η_a and T was investigated under the wide range shear rate().The results showed that the relation between η_a and T could simply,intuitively and actually be characterized with the equation of η_a=A+K_ηT.However,the equation of lnη_a=lnA+△E_η/RT not only can't express the relation between η_a and T intuitively,and also "compress" the variational extent of η_a with the change of or T.which lose authenticity between T or and η_a.
出处 《高分子通报》 CAS CSCD 北大核心 2010年第4期94-99,共6页 Polymer Bulletin
基金 国家自然科学基金(50903076) 中国博士后基金(20080440826)
关键词 聚合物 聚合物共混物 表观粘度 温度 剪切速率 表征方法 Polymer Polymer blends Apparent viscosity Shear rate Characterization approaches
  • 相关文献

参考文献6

二级参考文献23

共引文献21

同被引文献16

  • 1曾容,王洪敏.密封胶挤出性检测方法探讨及改进[J].中国建筑防水,2007(7):18-20. 被引量:2
  • 2Dai K, Xu X B, Li Z M. Electrically conductive carbon black (CB) filled in situ microfibrillar poly (ethylene terephthalate) (PET)/polyethylene (PE) composite with a selective CB distribution [ J ]. Polymer, 2007, 48 ( 3 ) z 849-859.
  • 3Dai K, Qu Y Y, Li Y, et al. Electrically conductive CB/ PA6/HDPE composite with a CB particles coated electro- spun PA6 fibrous network[J]. Materials Letters, 2014, 114196-99.
  • 4Zhang Y C, Dai K, Tang J H, et al. Anisotropically conductive polymer composites with a selective distribution of carbon black in an in situ microfibrillar reinforced blend [J]. Materials Letters,2010,64(13) :1430-1432.
  • 5Linares A,Canalda J C,Cagiao M E, et al. Conducting nanocomposites based on polyamide 6,6 and carbon nano bers prepared by cryogenic grinding[J]. Composites Sci- ence and Technology,2011,71(10) :1348-1352.
  • 6Harpaz I M, Narkis M. Thermo-electric behavior (PTC) of carbon black-containing PVDF/UHMWPE and PVDF/ XL-UHMWPE blends[J]. Polymer Engineering and Sci- ence, 2001,41(2):205-221.
  • 7Nakano H, Shimizu K,Takahashi S, et al. Resistivity- temperature characteristics of filler-dispersed polymer com- posites[J]. Polymer,2012,53(26): 6112-6117.
  • 8Bao S P, Liang G D, Tjong S C. Effect of mechanical stretching on electrical conductivity and positive tempera- ture coefficient characteristics of poly(vinylidene fluoride)/ carbon nanofiber composites prepared by non-solvent pre- cipitation[J]. Carbon,2011,49(5) : 1758-1768.
  • 9李吉明,刘煜,李娟,齐士成.填料对硅氧烷改性聚醚密封材料性能的影响[J].合成橡胶工业,2010,33(3):233-235. 被引量:7
  • 10李吉明,薛纪东,钟汉荣.单组分湿固化硅烷封端聚氨酯密封胶的制备及性能研究[J].化学与粘合,2012,34(1):13-16. 被引量:18

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部