期刊文献+

海洋工程用钢疲劳寿命与CTOD值关系的研究 被引量:2

Research on Relationship between CTOD and Fatigue Life of Offhore Engineering Steel
下载PDF
导出
摘要 通过对钻井平台上所用高强钢EQ70进行了韧度和疲劳性能的试验研究,得出了反映其韧度指标的裂纹尖端张开位移(CTOD)值和不同交变载荷下疲劳寿命值呈近似的线性关系.在应力幅值ΔP一定的情况下,疲劳寿命值N随着CTOD值的增大而增大,并且在高应力幅的时候,对数疲劳寿命和CTOD值有比较好的线性关系,最后还从微观意义上解释了产生这种关系的原因. Abstract:Based on the research on the experiments of toughness and fatigue performance of steel EQT0, which is mainly applied in drilling platform, linear relation is established between CTOD (Crack Tip Opening Displacement) used as an indicator of toughness of materials and fatigue life un- der alternating loads. When the stress amplitude AP is constant, the fatigue life N increases according to the raise of CTOD. Particularly, under high stress amplitude, the linear relation between the log- arithm of fatigue life and CTOD is much more conspicuous. A/so, explanation from microscopic aspect is given.
出处 《武汉理工大学学报(交通科学与工程版)》 2010年第2期323-327,共5页 Journal of Wuhan University of Technology(Transportation Science & Engineering)
基金 工业和信息化部科研项目资助(批准号:工信部装〈2009〉382号)
关键词 海洋工程 高强钢 厚板 CTOD 对数疲劳寿命 oceaning engineering high strength steel thick plate CTOD logarithm of fatigue life
  • 相关文献

参考文献5

  • 1Norsk Standard NS-EN 10225. Weldable structural steels for offshore structure- techctures delivery con- ditions[S]. Brussels : CEN National Members, 2001.
  • 2BS7448 Part 1. Fracture mechanics tonghness test [S].London: BSI publications,1991.
  • 3苗张木,曹锦,马涛,李永信,陈冰泉.FPSO模块支墩焊接接头低温CTOD韧度试验研究[J].中国造船,2007,48(3):73-79. 被引量:7
  • 4Morrison M L, Buchanan R A, Liaw P K, et al. Four- point-bending-fatiguetreloy 105 bulk metallic glass[J].Materials Science and Engineering, 2007, A 467:190-197.
  • 5ASTM E606. Standard practice for strain-controlled fatigue testing[S]. West Conshohocken: ASTM International, 2004.

二级参考文献15

  • 1曾恒一,赵耕贤,吴嘉蒙.浅水超大型FPSO特殊结构设计[J].船舶,2004,15(3):15-20. 被引量:2
  • 2苗张木,陶德馨,杨荣英,李永信.焊接接头韧度CTOD评定的适用性与允许值研究[J].机械强度,2006,28(1):150-154. 被引量:21
  • 3GB/T2358-1994.金属材料裂纹尖端张开位移试验方法[S].[S].,..
  • 4GB/T228-2002.金属材料室温拉伸试验方法[S].[S].,..
  • 5GB2649-1989.焊接接头机械性能试验取样方法[S].
  • 6ISO 5178:Destructive tests on welds in metallic materials-longitudinal tensile test on weld metal in fusion welded joints[S].
  • 7中国国家技术监督局.GB2652-1989.焊缝熔敷金属拉伸试验方法[S].
  • 8BS7448 Part1:1991.Fracture Mechanics Toughness Test[S].
  • 9BS7448 Part2:1997.Fracture Mechanics Toughness Test[S].
  • 10DET NORSKE VERITAS.Offshore Standard DNV-OS-C401:Fabrication and Testing of Offshore Structures[S].

共引文献6

同被引文献8

  • 1中国国家质量监督检验总局.金属材料室温拉伸试验方法GB/T22S-2002[S].北京:中国标准出版社,2002.
  • 2British Standard Institution. BS7448 Partl: 1991. Method for determination of KIc, critical CTOD and critical J values of metallic materials E S3. British Standard Institution, 1991.
  • 3British Standard Institution. BS7448 Part2: 1997. Method for determination bf KIc, critical CTOD andcritical J values of welds 'in metallic materials [ S]. British Standard Institution, 1997.
  • 4Det Norske Veritas. Offshore Standard DNV-OS- C401 : Fabrication and Testing of Offshore Structures [S]. Det Norske Veritas,2008.
  • 5矢岛浩 多田益男 棍本腾也 绳田卓生 野田俊介.大型构造物の损伤例とその教训.西部造船会会报,1986,:335-229.
  • 6王志坚,蒋军,王东坡,邓彩艳.海洋平台用钢D36超大厚度焊接接头CTOD试验[J].焊接学报,2007,28(8):103-107. 被引量:25
  • 7金晓军,霍立兴,张玉凤,李晓巍,曹军.X65管线钢焊缝金属断裂韧度的统计分布研究[J].焊管,2003,26(1):11-14. 被引量:1
  • 8邓彩艳,张玉凤,霍立兴,白秉仁,李小巍,曹军.X65管线钢焊接接头CTOD断裂韧度[J].焊接学报,2003,24(3):13-16. 被引量:13

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部