摘要
选用可精确描述小孔和熔池形貌的旋转高斯曲面体热源,建立了一个局部细化的钛合金激光深熔焊有限元数值计算模型,研究了激光能量密度与热输入对焊缝、小孔形貌以及焊缝及近缝区大梯度残余应力的分布特征.结果表明,钛合金激光焊接高残余应力位于小孔区域,而焊缝其余区域形成了大梯度残余应力状态;残余应力梯度在能量密度过高或过低,以及热输入过小时均较大;为避免大梯度残余应力的产生,应使焊接时激光能量密度处于中低状态.
A numerical calculation model with local refined mesh for laser deep penetration welding of titanium alloy is presented. A Rotatry-Gauss body heat source model was established to accurately describe the shape of keyhole and molten pool of the laser welded joint. The profile of keyhole and molten pool as well as the distribution of high gradient residual stresse are obtained. It is showed that the region of high stress locates in the keyhole region, and high gradient residual stress distributes in the other region of welded seam. The stresse gradient increases in the state of excessively high and low level of energy density as well as the state of lower linear energy. It is supposed that keeping the laser energy density in state of low and medium level or keeping the linear energy in state of low level could avoid the high gradient stresses.
出处
《焊接学报》
EI
CAS
CSCD
北大核心
2010年第3期37-40,共4页
Transactions of The China Welding Institution
基金
国家自然科学基金资助项目(50875200)
教育部博士点基金资助项目(20070698088)
关键词
大梯度
残余应力
能量密度
线能量
小孔
high gradient
residual stresses
energy density
linear energy
keyhole
