期刊文献+

Synthesis,structure and mechanical properties of Zr-Cu-based bulk metallic glass composites 被引量:1

Synthesis,structure and mechanical properties of Zr-Cu-based bulk metallic glass composites
下载PDF
导出
摘要 The unusual glass-forming ability(GFA) of the Zr48Cu36Ag8Al8 alloy and the high ductility of the Zr48Cu36Ag8Al8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a diameter of 25 mm was successfully synthesized using copper mold casting for the Zr48Cu36Ag8Al8 alloy.High GFA of this alloy was found to be related to a large supercooled liquid region and a quaternary eutectic point with low melting temperature.The bulk metallic glass matrix composites were prepared by introducing extra Ta particles into the Zr48Cu36Ag8Al8 melt.The composites consist of Ta particles homogenously distributed in the Zr48Cu36Ag8Al8 metallic glass matrix.The optimum content of Ta powder is 10at%for the composite with the highest plasticity,which shows a plastic strain of 31%. The unusual glass-forming ability(GFA) of the Zr48Cu36Ag8Al8 alloy and the high ductility of the Zr48Cu36Ag8Al8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a diameter of 25 mm was successfully synthesized using copper mold casting for the Zr48Cu36Ag8Al8 alloy.High GFA of this alloy was found to be related to a large supercooled liquid region and a quaternary eutectic point with low melting temperature.The bulk metallic glass matrix composites were prepared by introducing extra Ta particles into the Zr48Cu36Ag8Al8 melt.The composites consist of Ta particles homogenously distributed in the Zr48Cu36Ag8Al8 metallic glass matrix.The optimum content of Ta powder is 10at%for the composite with the highest plasticity,which shows a plastic strain of 31%.
作者 Akihisa Inoue
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2010年第2期208-213,共6页 矿物冶金与材料学报(英文版)
基金 supported by Grant-In-Aid for Scientific Research(C)(No.19560689)
关键词 bulk metallic glass composites glass forming ability Zr-Cu-based alloy plastic strain bulk metallic glass composites glass forming ability Zr-Cu-based alloy plastic strain
  • 相关文献

参考文献10

  • 1A.Inoue,Stabilization of metallic supercooled liquid and bulk amorphous alloys,Acta Mater.,48(2000),p.279.
  • 2Q.S.Zhang,W.Zhang,and A,Inoue,New Cu-Zr-based bulk metallic glasses with large diameters ofup to 1.5 cm,Scripta Mater.,55(2006),p.711.
  • 3Q.S.Zhang,W.Zhang,and A.Inoue,Preparation of Cu(36)Zr(48)Ag8Al8 bulk metallic glass with a diameter of 25 mm by copper mold casting,Mater.Trans.,48(2007),p.629.
  • 4H.Choi-Yim and W.L.Johnson,Bulk metallic glass matrix composites,Appl.Phys.Lett.,71(1997),p,3808.
  • 5C.C.Hays,C.P.Kim,and W.L.Johnson,Microstructure controlled shear band pattem formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions,Phys,Rev.Lett.,84(2000),p.2901.
  • 6Q.S.Zhang,W.Zhang,G.Q.Xie,and A.Inoue,Unusual plasticity of the particulate-reinforced Cu-Zr-based bulk metallic glass composites,Mater.Trans.,48(2007),p,2542.
  • 7Q.S.Zhang,W.Zhang,G.Q.Xie,K.S.Nakayama,H.Kimura,and A.Inoue,Formation of bulk metallic glass in situ composites in Cu(50)Zr(45)Ti5 alloy,J.Alloys Compd.,431(2007),p.236.
  • 8W.Zhang,Q.S.Zhang,Q.C.Lin,and A.Inoue,Synthesis and properties of Cu-Zr-Ag-Al glassy alloys with high glass-forming ability,Mater.Sci.Eng.B,148(2008),p.92.
  • 9D.H.Xu,G.Duan,and W.L.Johnson,Unusual glass-forming ability of bulk amorphous alloys based on ordinary metal copper,Phys.Rev.Lett.,92(2004),art.No.245504-1.
  • 10W.Zhang,Q.S.Zhang,and A.Inoue,Fabrication of Cu-Zr-Ag-Al glassy alloy samples with a diameter of 20 mm by water quenching,J.Mater.Res.,23(2008),p.1452.

同被引文献5

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部