期刊文献+

稀土Gd对热压烧结Bi_2Te_3基材料热电性能的影响 被引量:5

Effects of Gd on Thermoelectric Properties of Bi_2Te_3 Based Materials
下载PDF
导出
摘要 稀土元素对Bi2Te3基材料热电性能的影响一直是Bi2Te3基热电材料研究的热点。本文研究了不同Gd掺杂量Bi2Te3基热电材料的热压烧结工艺参数,运用XRD,SEM方法对材料的物相成分和形貌进行了表征,研究了20MPa下不同Gd掺杂对Bi2Te3基材料的载流子浓度、电导率、Seebeck系数的影响。研究结果表明,Gd掺杂没有明显改变Bi2Te3基材料的晶体结构,适量的Gd掺杂有利于减小载流子浓度、提高Bi2Te3基材料的热电性能。 The effects of rare earth elements on thermoelectric performances of Bi2Te3-based thermoelectric materials have always been hot topics.Here the hot-pressure sintering parameters versus different Gd dopants into Bi2Te3-based thermoelectric materials were studied.The composition and morphology were characterized by XRD and SEM analysis.The influences of different amounts of Gd dopants on the carrier concentration,electrical conductivity,and seebeck coefficient of Bi2Te3-based materials were studied.The results show that,Gd-dopant do not change the crystal structure of Bi2Te3-based materials evidently.An appropriate amount of Gd dopant is conducive to reducing the carrier concentration and improving the thermoelectric properties of Bi2Te3-based materials.
出处 《材料科学与工程学报》 CAS CSCD 北大核心 2010年第2期279-282,316,共5页 Journal of Materials Science and Engineering
关键词 Bi2Te3基材料 热压烧结 GD掺杂 热电性能 Bi2Te3-based materials hot-pressure sintering process Gd doping thermoelectric properties
  • 相关文献

参考文献2

二级参考文献22

  • 1余柏林,唐新峰,祁琼,张清杰.CoSb_3纳米热电材料的制备及热传输特性[J].物理学报,2004,53(9):3130-3135. 被引量:16
  • 2高敏 张景韶 等.温差电转换及其应用[M].兵器工业出版社,1996..
  • 3吕强 荣剑英 赵磊 张红晨 胡建民 信江波.物理学报,2005,54:3321-3321.
  • 4Chen G,Dresselhaus M S,Dresselhaus G,Fleurial J P,Caillat T 2003 Inter.Mater.Rev.48 1
  • 5Sokolov O B,Skipidarov S Y,Duvankov N I 2000 J.Crystal Growth 236 181
  • 6Ettenberg M H,Maddux J R,Taylor P J,Jesser W A,Rosi F D 1997 J.Crystal Growth 179 495
  • 7Jiang J,Chen L D,Yao Q,Bai S Q,Wang Q 2005 Mater.Chem.Phys.92 39
  • 8Jiang J,Chen L D,Yao Q,Bai S Q,Wang Q 2005 J.Crystal Growth 277 258
  • 9Oh T S,Hyum D B,Kolomoets N V 2000 Scripta Mater.42 849
  • 10Pierrat P,Dauscher A,Lenoir B,Lopez R M,Scherrer H 1997 J.Mater.Sci.32 3563

共引文献11

同被引文献75

  • 1王月媛,胡建民,信江波,吕强,荣剑英.(Bi_2Te_3)_(0.90)(Sb_2Te_3)_(0.05)(Sb_2Se_3)_(0.05)熔炼冷压烧结材料的制备及其热电性能的研究[J].人工晶体学报,2006,35(3):655-659. 被引量:1
  • 2李亚丽,蒋俊,许高杰,段雷,李志祥,王琴,李勇,崔平.Bi_2Te_3基热电材料的湿化学还原法合成反应机制[J].稀有金属材料与工程,2007,36(A02):233-235. 被引量:3
  • 3DiSalvo F J. Thermoelectric Cooling and Power Generation [J]. Science, 1999, 285(5428) : 703 ~706.
  • 4Bell L E. Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems [J]. Science, 2008, 321 (5895): 1457-1461.
  • 5Poudel B, Hao Q. High Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys [J]. Science, 2008, 320 (5876): 634-638.
  • 6CaoY Q, Zhao X B, Zhu T J, et al. Syntheses and thermoelectric properties of Bi2 Tea/Sbz Te~ bulk nanocomposites with laminated nanostructure [J]. Applied Physics Letters, 2008, 92(143106) :1 -3.
  • 7Fan X A, Yang J Y, Chen R G, et al. Characterization and thermoelectric properties of p-type 25% BizTea- 75% SbeTe prepared via mechanical alloying and plasma activated sintering[J].Journal of Physics D: Applied Physics, 2006, 39(4) : 740 - 745.
  • 8Li Y L, Jiang J, Xu G J, et al. Synthesis of micro/ nanostructured p-type Bi0. 4Sbl. 6Te3 and its thermoelectric properties [J].Journal of Alloys and Compounds, 2009, 480 (2) :954 ~957.
  • 9Xie W J, Tang X F, Yan Y G, et al. Trtt, Unique nanostructures and enhanced thermoeleetric performance of melt- spun BiSbTe alloys [J]. Applied Physics Letters, 2009, 94(10) : 1 ~3.
  • 10Chen H, Liu D W, Zb.ang B P, et al. Enhanced Thermoelectric Properties Obtained by Compositional Optimization in P-type Bix Sbz-xTe3 Fabricated by Mechanical Alloying and Spark Plasma Sintering [J]. J Electronic Materials, 2011, 40:942 ~945.

引证文献5

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部