期刊文献+

轨道车辆牵引电机负载模拟系统建模及仿真 被引量:6

Modeling and Simulation for Load Emulation of Traction Motor on Railway Vehicle
下载PDF
导出
摘要 在轨道牵引系统研究中,真车试验有着成本高、周期长、实现困难等诸多缺点,而搭建轨道车辆牵引电机负载模拟平台就可弥补这些缺点。本文提出了搭建交流电机——直流电机负载模拟平台的方法,推导出了牵引电机轴上的等效负载转矩及等效负载惯量,并基于高速动车组CRH2搭建了负载模拟平台Matlab/Simulink仿真模型。 On the study of railway traction system, real vehicle test is not convenience due to its high cost, long test cycle and other defects, while load emulation is easy to realize. This paper proposes a method of load emulation by creating AC motor--DC motor drive platform, derives the equivalent load moment and inertia on traction motor, completes the simulation of the platform using Matlab / Simulink based on CRH2.
出处 《微计算机信息》 2010年第13期161-163,共3页 Control & Automation
关键词 负载模拟 等效惯量 轨道车辆 牵引电机 load emulation equivalent inertia railway vehicle traction motor
  • 相关文献

参考文献4

  • 1Jesus Arellano-Padilla, Greg M. Asher, Mark Sumner. Control of an AC Dynamometer for Dynamic Emulation of Mechanical Loads with Stiff and Flexible Shafts [J], IEEE Transactions on Industrial Electronics, vol.53, NO.4, August 2006.
  • 2M. Rodic, K. Jezemik, M. Trlep. Control Design in Mechatronic Systems Using Dynamic Emulation of Mechanical Loads [C], IEEE ISIE 2005, June 20-23, 2005, Dubrovnik, Croatia.
  • 3吴晓东,关强,李冰.基于VC、Matlab的汽车制动性能联合仿真[J].微计算机信息,2007(34):195-197. 被引量:3
  • 4The Mathworks, Inc., SimPowerSystems User's Guide, Version 7.7, October 2008.

二级参考文献3

共引文献2

同被引文献47

  • 1王延飞,曹宏发,靳明旭.交流传动电力机车采用轴控的必要性[J].铁道机车车辆,2006,26(4):29-31. 被引量:5
  • 2Hiro-o Yamazaki,曾云(译) 张志学(校).基于非线性鲁棒控制原理的防滑控制[J].变流技术与电力牵引,2007(3):40-44. 被引量:1
  • 3Martyn Z, Alasdair C, Holden J. Modeling Electrified Transit Systems [J ]. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2010,59(6) : 2748.
  • 4廖双晴,肖建,黄景春.机车黏着控制方法的研究现状综述[J].铁道机车车辆,2007,27(B10):39-42. 被引量:2
  • 5Satoshi Kadowaki, Kiyoshi Ohishi, Tadashi Hata, et al. Antislip Readhesion Control Based on Speed-sensorless Vector Control and Disturbance Observer for Electric Commuter Train Series 205-5000 of the East Japan Railway Company [ J ]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2007, 54(4) : 2001-2008.
  • 6Jeong M K, Cho S J, Lee K J, et al. The High Performance Tractive Force Control Method of Propulsion Control System for Electric Railway Vehicles[C]//The 1st International Forum on Strategic Technology. Ulsan: IEEE, 2006: 451-455.
  • 7Imai K, Ohishi K, Sano T, et al. Real-time distribution control of torque reference of commuter train for fine re-adhesion contol[C]//11th IEEE International Workshop on Advanced Motion Control. Nagaoka: IEEE, 2010: 228-233.
  • 8Jara T, Koseki T. Study on re-adhesion control by monitoring excessive angular momentum in electric railway tractions[C]// 12th IEEE International Workshop on Advanced Motion Control. Sarajevo: IEEE, 2012: 1-6.
  • 9Kawamura A, Takeuchi K, Furuya T, et al. Measurement of the tractive force and the new adhesion control by the newly developed tractive force measurement equipment[C]//Proceedings of the Power Conversion Conference. Osaka: IEEE, 2002: 879-884.
  • 10Cao M, Takeuchi K, Furuya T, et al. Adhesion control in low-speed region and experiment verification with considering low-resolution pulse generator[C]// Proceedings of the Power Conversion Conference. Osaka: IEEE, 2002: 873-878.

引证文献6

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部