摘要
为提高电容测量精度.针对电容式传感器的工作原理设计了基于PIC16LF874单片机电容测量模块。简单阐述了电容测量电路的应用背景和国内外研究现状,介绍了美国Mieroehip公司PIC16LF874单片机的特性。电容式传感器输出的动态微弱电容信号通过PS021型电容数字转换器把模拟量数据转换成数字量数据.所测数据由PIC16LF874单片机应用程序进行处理、显示和保存。实验结果表明,固定电容标称值为10-20pF的测量值相对误差在1%以内,同时也可知被测电容容值越大,测量值和标称值相对误差越小。
To improve the accuracy of capacitance measurement,aimed at the principle of work of mercury capacitance acceleration transducer,the design of micro capacitance measurement circuit is based on the key PIC16LF874 chip. Briefly discusses the application of the capacitance measuring circuit for the background and status of foreign researchers ,focusing on the United States PIC16LF874 microcontroller features. Capacitive sensor outputed signal through the dynamics of weak PSO21-chip capacitors (capacitance-digital converter) to convert analog data into digital data,the measured data from the PIC16LF874 microcontroller application process, display and preservation. Experimental results show that the fixed capacitor 10pF - 20pF nominal value of the measured value of relative error is within 1% ,but also it canbe seen the value of the measured capacitance larger,measuring value and the nominal value of relative error smaller.
出处
《电子设计工程》
2010年第5期34-36,39,共4页
Electronic Design Engineering
基金
国家自然科学基金项目资助(项目编号:60274029)