摘要
介绍了UG软件数控铣削编程与仿真的步骤;提出了数控铣削编程与仿真的难点是操作参数中几何体和切削层的设定;操作几何体设定时,要根据零件的几何形状选择必须设定的几何体进行切削区域的定义;切削层设定时,要与操作几何体相结合,根据零件的几何形状设置内容要前后一致;并以凸台部件和凹槽部件为例验证了操作设置的正确性。
The operation process of UG software on programming and simulation of NC milling is introduced. Programming and simulation of NC milling difficult is the operation parameters settings of geometry and cutting layer.Set operation geometry, should choose according to the geometry of parts necessary to set geometry for cutting the definition of the region. Set the cutting layer, should be combined with the operation of the geometry, according to the geometry of parts to set the content to be consistent. And to convex sets of parts and components, for example groove verify the correctness of the operation set.
出处
《煤矿机械》
北大核心
2010年第5期113-116,共4页
Coal Mine Machinery
关键词
数控铣削
UG
编程与仿真
几何体
切削层
NC milling
UG
programming and simulation
geometry
cutting lay